Abstract
The positive effect of the additional alloying of cast Fe–Cr–C steels on the formation of a secondary structure in the steels and their tribological characteristics under boundary friction has been shown. This effect leads to a decrease in the wear rate of the cast steel 1.2–5.2 times compared to that of the commercial 95Kh18 steel depending on the alloying system of the steels.
Similar content being viewed by others
References
Zuev, A.D., Kantorovich, V.I., Tsypin, I.I., and Gol’dshtein, V.A., Selection of material for sealing rings of machine face seals, Vestnik Mashinostr., 1986, no. 7, pp. 20–22.
Tupitsyn, A.A., Pogodin, V.K., Mikhailyuk, E.A., and Komarov, B.D., End-seal frictional coefficients, Chem. Petrol. Eng., 2001, vol. 37, nos. 11–12, pp. 623–626.
Kirienko, O.F., Tsvetkova, N.B., Berdennikov, A.I., and Shatsova, S.A., Study of reasons of anomal wear of end seal of screw pump. II. Redistribution of chemical elements near friction surface, Trenie Iznos, 1985, vol. 6, no. 4, pp. 674–683.
Mustafaev, S.I., Braun, E.D., and Khaimzon, O.E., Wear-resistance of materials prospect for production of mining machine face seals, Vestn. Mashinostr., 1982, no. 1, pp. 33–35.
Gordeev, V.V., NPK “Germetik”–A specialized production of end seals for all branches of national economy, Khim. Neftegaz. Mashinostr., 2001, vol. 37, no. 8, pp. 14–17.
Novytskyy, V.G., Wear rate of Fe–Cr–C–Mn steels under sliding friction, in Proc. 4th AIMETA Int. Tribology Conf., Italy, 2004, pp. 45–54.
Mayer, E., Axial Gleitringdichtungen Dusseldorf: VDI, Verlag CmbH, 1974.
Metody ispytaniya, kontrolya i issledovaniya mashinostroitel’nykh materialov. T. 1. Fizicheskie metody issledovaniya metallov (Methods of Testing, Control, and Study of Machine Engineering Materials. Vol. 1. Physical Methods of Metal Study), Kishkin, S.T., Ed., Moscow: Mashinostroenie, 1971.
Novitskii, V.G., Wear resistance of chromium steel alloyed by niobium, tungsten, vanadium, in Povyshenie iznosostoikosti litykh materialov (Increase of Wear Resistance of Cast Materials), Kiev: Inst. Problem Lit’ya Akad. Nauk USSR, 1983, pp. 82–85.
Rânea, C., Wear maps for thin layers, in The Annals of University “Dunârea de Jos” of Galati, Fascicle VIII, Tribology, 2003, pp. 117–122.
Svoistva konstruktsionnykh materialov na osnove ugleroda. Spravochnik materialov na osnove ugleroda (Properties of Structural Materials on the Carbon Basis. A Handbook of Materials on the Carbon Basis), Sosedov, V.P., Ed., Moscow: Metallurgiya-, 1975.
Semenov, A.P., Antifriction materials: Application and outlook, Trenie Smazka Mash. Mekhanizm., 2007, no. 12, pp. 21–35.
Bryant, P.J., Gutshall, P.L., and Taylor, L.H., A study of mechanisms of graphite friction and wear, Wear, 1964, no. 1, pp. 118–126.
Gardos, M.N., The problem-solving role of basic science in solid lubrication, in New Directions in Tribology. Plenary and Invited Papers from the First World Tribology Congress, UK, 1997, pp. 230–250.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.G. Novytskyi, V.A. Loktionov-Remizovskyi, V.L. Lakhnenko, D.D. Panasenko, 2016, published in Trenie i Iznos, 2016, Vol. 37, No. 4, pp. 466–474.
About this article
Cite this article
Novytskyi, V.G., Loktionov-Remizovskyi, V.A., Lakhnenko, V.L. et al. Wear resistance of cast Fe–Cr–C steels with various combinations of structural constituents at high velocities of sliding. J. Frict. Wear 37, 363–370 (2016). https://doi.org/10.3103/S1068366616040140
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366616040140