Abstract
The present paper represents dependences for determining the approach and actual area of the contact on a single microasperity with the conical shape with the surface of a part. It is shown that loads may differ significantly under defined contact conditions at equal actual contact areas of the microasperity with spherical and conical shapes.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Demkin, N.B., Kontaktirovanie sherokhovatykh poverkhnostei (Contact of Rough Surfaces), Moscow: Nauka, 1970.
Demkin, N.B. and Izmailov, V.V., Some results of simulation of contact of rough surfaces, in Mekhanika i fizika protsessov na poverkhnosti v kontakte tverdykh tel, detalei tekhnologicheskogo i energeticheskogo oborudovaniya. Mezhvuz. sb. nauch. tr. (Mechanics and Physics of Processes on Surface in Contact of Solids, Details of Technological and Energetic Equipment. Interinst. Coll. Sci. Papers), Tver: Tver. Gos. Tekhn. Univ., 2009.
Drozd, M.S. and Matlin, M.M., Laws of elastic-plastic flattening of double curvature segment, Trenie Iznos, 1990, vol. 11, no. 5, pp. 782–791.
Matlin, M.M., Kazankina, E.N., and Kazankin, V.A., Calculation of the actual contact area between a single microasperity and the smooth surface of a part when the hardnesses of their materials are similar, J. Friction Wear, 2011, vol. 32, pp. 140–144.
Matlin, M.M., Mozgunova, A.I., Kazankina, E.N., and Kazankin, V.A., Calculating real area of contact of single microasperity modeled by a cylinder with smooth surface, J. Friction Wear, 2013, vol. 34, pp. 391–397.
Gudkov, A.A. and Slavskii, Yu.I., Metody izmereniya tverdosti metallov i splavov (Methods of Measurement of Metal and Alloy Hardness), Moscow: Metallurgiya, 1982.
Slavskii, Yu.I., Matlin, M.M., and Zhulenev, E.P., RF Patent 1649377, Byull. Izobr., 1991, no. 18.
Slavskii, Yu.I. and Matlin, M.M., Determination of hardness according to conical indenter implantation depth, Zavodsk. Laborat., 1991, vol. 57, no. 10, pp. 43–45.
Lur’e, A.I., Prostranstvennye zadachi teorii uprugosti (Space Problems of Elasticity Theory), Moscow: Gos-TekhTeorLit, 1955.
Galanov, V.A., Grigoriev, O.N., Mil’man, Yu.V., et al., Determination of hardness and Young’s modulus at elastic-plastic implantation of indenters in materials, Doklady Akad. Nauk SSSR, 1984, vol. 274, no. 4, pp. 315–317.
Spravochnik po tribotekhnike (An Handbook on Tribotechnics), Hebdy, M. and Chichinadze, A.V., Eds., Moscow: Mashinostroenie, 1989.
Drozd, M.S., Matlin, M.M., and Sidyakin, Yu.I., Inzhenernye raschety uprugoplasticheskoi kontaktnoi deformatsii (Engineering calculations of elastic-plastic contact deformation), Moscow: Mashinostroenie, 1986.
GOST (State Standards) 18835-73. Metals. Methods of plastic hardness measurement, 1974.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.M. Matlin, A.I. Mozgunova, E.N. Kazankina, V.A. Kazankin, 2014, published in Trenie i Iznos, 2014, Vol. 35, No. 5, pp. 643–649.
About this article
Cite this article
Matlin, M.M., Mozgunova, A.I., Kazankina, E.N. et al. Calculation of actual area in the contact of a single microasperity modeled by a cone with a smooth surface of the part. J. Frict. Wear 35, 443–447 (2014). https://doi.org/10.3103/S1068366614050110
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366614050110