Abstract
Shape factors of fast-moving heat sources and a distribution of heat flows between a body and a counterbody are calculated, a formula for the average temperature in the friction zone is derived, and an example of calculations is presented.
Similar content being viewed by others
References
Rykalin, N.N., Raschety teplovykh protsessov pri svarke, (Calculation of Heat Processes at Welding), Moscow: Mashgiz, 1951.
Carslaw, H.S. and Jaeger, K.C., Conduction of Heat in Solids, 2nd Ed., London: Oxford University, 1959; Moscow: Nauka, 1964.
Reznikov, A.N., Teplofizika protsessov mekhanicheskoi obrabotki materialov, (Heat Physics of Processes of Mechanical Treatment of Materials), Moscow: Mashinostroenie, 1981.
Peleshenko, B.I., Kravchenko, Yu.G., Burya, A.I., and Kovalenko, A.V., Temperature field calculation on stripe surface of contrel friction, J. Friction Wear, 2012, vol. 33, pp. 239–243.
Chirkin, V.S., Teploprovodnost’ promyshlennykh materialov, (Heat Conduction of Industrial Materials), Moscow: Mashgiz, 1962.
Teploprovodnost’ tverdykh tel: Spravochnik, (Heat Conduction of Solids. A Handbook), Okhotin, A.S., Ed., Moscow: Energoatomizdat, 1984.
Babichev, A.P., Babushkina, N.A., Bratkovskii, A.M., et al., Fizicheskie velichiny: Spravochnik, (Physical Values: A Handbook), Grigor’ev, I.S. and Meilikhov, E.Z., Eds., Moscow: Energoatomizdat, 1991.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.G. Kravchenko, B.I. Peleshenko, A.I. Burya, O.Yu. Kuznetsova, 2013, published in Trenie i Iznos, 2013, Vol. 34, No. 4, pp. 397–403.
About this article
Cite this article
Kravchenko, Y.G., Peleshenko, B.I., Burya, A.I. et al. Analytical calculation of temperature in contact zone of friction pair at high velocities. J. Frict. Wear 34, 302–307 (2013). https://doi.org/10.3103/S1068366613040077
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366613040077