Abstract
The experimental results have demonstrated that tools made from nitride ceramics have high efficiency in the high-speed machining of nickel-based AP741NP alloy. The wear of these tools proved to depend on the cutting modes, as well as the properties and structure of ceramics. Features of the wear of cutting tools from nitride ceramics are determined when machining nickel-based AP741NP alloy.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Dudzinski, D., Devillez, A., Moufki, A., Larrouquere, D., Zerrouki, V., and Vigneau, J., A review of developments towards dry and high speed machining of Inconel 718 alloy, Int. J. Machine Tools Manufact., 2004, no. 44, pp. 439–456.
Kuzin, V.V., Effective use of high density ceramic for manufacture of cutting and working tools, Refract. Indust. Ceram., 2011, vol. 51, pp. 421–426.
Grigor’ev, S.N. and Kuzin, V.V., Prospects of using tools with ceramic cutter plates in a modern metalworking, Glass and Ceramics, 2011, no. 8, pp. 13–19.
Kuzin, V.V., Study of high-speed cutting with ceramic tools, Russ. Eng. Res., 2004, vol. 51, pp. 40–46.
Narutaki, N., Yamane, Y., Hayashi, K., et al., Highspeed machining of Inconel 718 with ceramic tools, Annals of the ClRP, 1993, vol. 42, pp. 103–106.
Jun, Z., Jianxin, D., Jianhua, Z., and Xing, A., Failure mechanisms of a whisker-reinforced ceramic tool when machining nickel-based alloys, Wear, 1997, vol. 208, pp. 220–225.
Altin, A., Nalbant, M., and Taskesen, A., The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools, Materials and Design, 2007, vol. 28, pp. 2518–2522.
Kuzin, V.V., Grigor’ev, S.N., and Fedorov, S.Yu., Effect of processed material properties on strain-deformed state of ceramic tools, Vestnik Mashinostroeniya, 2012, no. 7, pp. 72–77.
Garibov, G.S., Buslavskii, L.S., and Sizova, R.N., Development of technology of gas-turbine engine critical detail production by granule metallurgy method, in Dvigateli XXI veka (Engines of XXI Century), Moscow: TsIAM, 2001.
Garibov, G.S., Improving of exploitation characteristics of disks from granulated EP741NP alloy, Turbiny i Dizeli, 2005, nos. 9–10, pp. 16–19.
Kuzin, V.V., Anikin, V.N., and Fedorov, S.Yu., Wear and failure of ceramic cutting plates, Russ. Eng. Res., 2010, vol. 30, pp. 1116–1123.
Volosova, M.A. and Kuzin, V.V., Regular features of wear of cutting plates from oxide and nitride ceramics, Metal Sci. Heat Treat., 2012, vol. 54, pp. 41–46.
Grigor’ev, S.N., Kuzin, V.V., Burton, D., and Batako, A., Influence of thermal loads on the stress-strain state of aluminum-oxide ceramic cutting plates, Russ. Eng. Res., 2012, vol. 32, pp. 473–477.
Grigor’ev, S.N., Kuzin, V.V., Morgan, M.N., and Batako, A., Influence of thermal loads on the stress-strain state of aluminum-oxide ceramic cutting plates, Russ. Eng. Res., 2012, vol. 32, pp. 67–71.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Kuzin, M.A. Volosova, M.Yu. Fedorov, 2013, published in Trenie i Iznos, 2013, Vol. 34, No. 3, pp. 265–271.
About this article
Cite this article
Kuzin, V.V., Volosova, M.A. & Fedorov, M.Y. Wear of tools from nitride ceramics when machining nickel-based alloys. J. Frict. Wear 34, 199–203 (2013). https://doi.org/10.3103/S1068366613030100
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366613030100