Abstract
Currently available approaches to the description of the contact of real engineering surfaces under the effect of normal and tangential forces are considered. The description of original results is preceded by a brief review of publications, mainly by Russian authors. The influence of the microtopography of the surfaces in contact on the normal and tangential flexibilities of contact is analyzed using an original model. It has been shown that the values of the normal and tangential flexibilities of contact are close. Recommendations for selecting a method of surface machining to reduce the contact flexibility are made.
Similar content being viewed by others
References
Demkin, N.B., Kontaktirovanie sherokhovatykh poverkhnostei (Contact of Rough Surfaces), Moscow: Nauka, 1970.
Demkin, N.B. and Ryzhov, E.V., Kachestvo poverkhnosti i kontakt detalei mashin (Quality of Surface and Contact of Machine Details), Moscow: Mashinostroenie, 1981.
Ryzhov, E.V., Tekhnologicheskie metody povysheniya iznosostoikosti detalei mashin (Technological Methods of Increasing of Machine Detail Wear-Resistance), Kiev: Naukova Dumka, 1984.
Suslov, A.G., Kachestvo poverkhnostnogo sloya detalei mashin (Quality of Machine Detail Surface Layer), Moscow: Mashinostroenie, 2000.
Khusu, A.P., Vitenberg, Yu.R., and Pal’mov, V.A., Sherokhovatost’ poverkhnostei: teoretiko-veroyatnostnyi podkhod (Roughness of Surfaces: Theoretical-Probability Approach), Moscow: Nauka, 1975.
Rudzit, Ya.A., Mikrogeometriya i kontaktnoe vzaimodeistvie poverkhnostei (Microgeometry and Contact Interaction of Surfaces), Riga: Zinatne, 1975.
Semenyuk, N.F. and Sirenko, G.A., Description of topography of friction anisotropy rough surfaces with the help accidental field model, Trenie Iznos, 1980, vol. 1, pp. 1010–1020.
Tikhomirov, V.P., Contact of fractal surfaces, J. Friction Wear, 1997, vol. 18, pp. 369–374.
Argatov, I.I. and Dmitriev, N.N., Osnovy teorii uprugogo diskretnogo kontakta (Foundations of Elastic Discrete Contact Theory), St. Petersburg: Politekhnika, 2003.
Gorokhov, D.B., Contact interaction of fractal rough surfaces of machine details, Cand. Sci. (Tech.) Dissertation, Bratsk, 2005.
Zhuravlev, G.A. and Karpenko, V.A., Approaching of elastic bodies, modeled by circular cylinders, Tekhnika Mashinostr., 2000, vol. 28, no. 6, pp. 51–55.
Johnson, K.L., Contact Mechanics, Cambridge: Cambridge University Press, 1985.
Drozd, M.S., Matlin, M.M., and Sidyakin, Yu.I., Inzhenernye raschety uprugoplasticheskoi kontaktnoi deformatsii (Engineering Calculations of Elastic-Plastic Contact Deformation), Moscow: Mashinostroenie, 1986.
Aizikovich, S.M., Aleksandrov, V.M., Belokon’, A.V., Krenev, L.I., and Trubchik, I.S., Kontaktnye zadachi teorii uprugosti dlya neodnorodnykh sred (Contact Problems of Theory of Elasticity for Heterogeneous Media), Moscow: Fizmatlit, 2006.
Lyubicheva, A.N., Contact interaction and wear of heterogeneous bodies, Cand. Sci. (Tech.) Dissertation, Moscow, 2008.
Izmailov, V.V., Effect of coating on processes of mechanical and electrical contact of rough surfaces, Trenie Iznos, 1995, vol. 16, pp. 1026–1047.
Lankov, A.A. and Mironov, V.A., Uprugost’, uprugoplastichnost’, plastichnost’ v konstruktsionnykh sredakh (Elasticity, Elastoplasticity, Plasticity in Construction Media), Tver: Tver. Gos. Techn. Univ., 1997.
Goryacheva, I.G., Mekhanika friktsionnogo vzaimodeistviya (Mechanics of Friction Interaction), Moscow: Nauka, 2001.
Maksak, V.I., Predvaritel’noe smeshchenie i zhestkost’ mekhanicheskogo kontakta (Preliminary Displacement and Stiffness of Mechanical Contact), Moscow: Nauka, 1975.
Ivanov, A.S., Contact stiffness of immobile joints of machine details, Doctoral (Tech.) Dissertation, Moscow, 2006.
Perfil’eva, N.V., Dynamical model of mechanical contact of conditionally-immobile joints, Doctoral (Tech.) Dissertation Tomsk, 2003.
Soldatenkov, I.A., Iznosokontaktnaya zadacha s prilozheniyami k inzhenernomu raschetu iznosa (Wear-Contact Problem with Applications to Engineering Calculation of Wear), Moscow: Fizmatkniga, 2010.
Tigetov, D.G., Development and research of probability models of rough surface interaction during friction, Cand. Sci. (Tech.) Dissertation, Moscow, 2010.
Myshkin, N.K., Konchits, V.V., and Braunovich, M., Elektricheskie Kontakty (Electrical Contacts), Dolgoprudnyi: Intellekt, 2008.
Makarov, V.V., Experimental studies of fretting-corrosion of heat-producing elements of heat-producing assemblies of water-water energetic reactors, Cand. Sci. (Tech.) Dissertation, Moscow, 2007.
Demkin, N.B. and Izmailov, V.V., The relation between the friction contact performance and the microgeometry of contacting surfaces, J. Friction Wear, 2010, vol. 31, pp. 48–55.
Izmailov, V.V. and Novoselova, M.V., Kontakt tverdykh tel i ego provodimost’ (Contact of Solids and Its Conductivity), Tver: Tver. Gos. Techn. Univ., 2010.
Izmailov, V.V. and Levykin, D.A., Simulation of contact interaction of rough surfaces at tangential micro-displacements, Trenie Smazka Mash. Mekhan., 2012, No. 4, pp. 16–22.
Izmailov, V.V. and Levykin, D.A., Programma dlya rascheta ekspluatatsionnykh kharakteristik mekhanicheskogo i elektricheskogo kontakta tekhnicheskikh poverkhnostei (Program for Calculation of Exploitation Characteristics of Mechanical and Electric Contact of Technical Surfaces), Svid. o Gos. Registratsii Programmy dlya EVM No. 2011616905, 2011.
Levina, Z.M. and Reshetov, D.N., Kontaktnaya zhestkost’ mashin (Contact Stiffness of Machines), Moscow: Mashinostroenie, 1971.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Izmailov, 2013, published in Trenie i Iznos, 2013, Vol. 34, No. 2, pp. 120–128.
About this article
Cite this article
Izmailov, V.V. Contact of surfaces under small tangential displacements. J. Frict. Wear 34, 92–98 (2013). https://doi.org/10.3103/S1068366613020062
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366613020062