Abstract
The influence of nano- and microfillers, including nanofibers and powder of Al2O3 and aluminum oxyhydrides AlO(OH) on the mechanical and tribological characteristics of ultrahigh-molecular-weight polyethylene (UHMWPE) is studied. It is found that modification of UHMWPE with nanofibers of Al2O3 within 0.1–0.5 wt % ensures a considerable increase in its hardness and multifold increase in its wear resistance. Modification with ultradisperse powders of Al2O3 (200–500 nm) in the same amounts has an insignificant effect on the polymer characteristics. Filling of UHMWPE with micron-sized particles (3–50 μm) in amounts of 20 wt % results in increased wear resistance of the original polymer, comparable with the wear resistance at low nanofiber content. X-ray diffraction analysis, IR spectroscopy, and electron microscopy are used to show that incorporation of Al2O3 nanofibers into UHMWPE results in the formation of a fundamentally different supermolecular structure in comparison with the use of microfillers.
Similar content being viewed by others
References
Mashkov, Yu.K., Ovchar, Z.N., Baibaratskaya, M.Yu., and Mamaev, O.A., Polimernye kompozitsionnye materialy v tribotekhnike (Polymeric Composite Materials in Tribological Engineering), Moscow: OOO “Nedra-Biznestsentr”, 2004.
Kerber, M.L., Vinogradov, V.M., Golovkin, G.S., et al., Polimernye kompozitsionnye materialy: struktura, svoistva, tekhnologiya: Uchebnoe posobie (Polymeric Composite Materials: Structure, Properties, Technology: Student’s Book), St. Petersburg: Professiya, 2008.
Lipatov, Yu.S., Fiziko-khimicheskie osnovy napolneniya polimerov (Physicochemical Foundations of Polymers Feeling), Moscow: Khimiya, 1991.
Galetz, M.C., Blar, T., Ruckdaschel, H., Sandler, K.W., and Alstadt, V., Carbon Nanofibre-Reinforced Ultra-high Molecular Weight Polyethylene for Tribological Applications, J. Appl. Polymer. Sci., 2007, vol. 104, pp. 4173–4181.
Jiasong Zhou and Fengyuan Yan, Improvement of the Tribological Behavior of Ultra-High-Molecular-Weight Polyethylene by Incorporation of Poly (Phenyl p-Hydroxyzoate), J. Appl. Polymer. Sci., 2005, vol. 96, pp. 2336–2343.
Jinggang Gai and Huilin Li, Ultrahigh Molecular Weight Polyethylene/Polypropylene/Organo-Montmorillonite Nanocomposites: Phase Morphology, Rheological and Mechanical Properties, J. Appl. Polymer. Sci., 2007, vol. 106, pp. 3023–3032.
Ruan, S.L., Gao, P., Yang, X.G., and Yu, T.X., Toughening High Performance Ultrahigh Molecular Weight Polyethylene Using Multiwalled Carbon Nanotubes, Polymer, 2003, vol. 44, no. 19, pp. 5643–5654.
Brandl, W., Marginean, G., Chirila, V., and Warschewski, W., Production and Characterization of Vapour Grown Carbon Fibers/Polypropylene Composites, Carbon, 2004, vol. 42, nos. 1, 5–9.
Zou Vaobaug, Feng Vongeheng, Wang Lu, and Liu Viaobo, Processing and Properties of MWNT/HDPE Composites, Carbon, 2004, vol. 42, no. 2, pp. 271–277.
Vinogradov, A.V., Tsiepens, U.A., and Andrianova, O.A., Superdispersed Refractory Compounds Are the Structurally-Active Fillers for Crystalline Polymers, Mekhan. Kompozit. Mater., 1992, no. 3, pp. 526–530.
Vinogradov, A.V. and Okhlopkova, A.A., Wear Resistance of Dispersed-Filled PTFE and Critical Concentrations of Superdispersed Filler, Trenie Iznos, 1995, vol. 16, no. 5, pp. 931–937.
Okhlopkova, A.A., Andrianova, O.A., and Popov, S.N., Modifikatsiya polimerov ul’tradispersnymi soedineniyami (Polymers Modification by Using the Superdispersed Compounds), Yakutsk: Yakutskii filial izdatel’stva SO RAN, 2003.
Andreeva, I.N., Veselovskaya, E.V., and Nalivaiko, E.I., Sverkhvysokomolekulyarnyi polietilen vysokoi plotnosti (Super High Molecular Polyethylene of High Density), Leningrad: Khimiya, 1982.
Okhlopkova, A.A., Gogoleva, O.V., and Shits, E.Yu., Polymeric Composite Materials on the Base of Super High Molecular Polyethylene and Superdispersed Compounds, Trenie Iznos, 2004, vol. 25, no. 2, pp. 2002–2006.
Zoo, V.S., An, J.-W., Lim, D.-Ph., and Lim, D.-S., Effect of Carbon Nanotube Addition on Tribological Behavior of UHMWPE, Trib. Lett., 2004, vol. 16, no. 4, pp. 305–309.
Aderikha, V.N., Shapovalov, V.A., Krasnov, A.P., and Pleskachevskii, Yu.M., Effect of Aerosil Organophilization on Tribological Properties of Low-Filled UHMWPE Composites, Trenie Iznos 2008, vol. 29, no. 4, pp. 421–427 [J. Friction Wear (Engl. Transl.), 2008, vol. 29. no. 4, pp. 318].
Nakanisi, K., Infrakrasnye spektry i stroenie organicheskikh soedinenii (Infrared Spectra and the Structure of Organic Compounds), Moscow: Mir, 1965.
Belyi, V.A., Sviridenok, A.I., Petrokovets, M.I., and Savkin, V.G., Trenie i iznos materialov na osnove polimerov (Friction and Wear of Polymer-Based Materials), Minsk: Nauka i tekhnika, 1976.
Pesetskii, S.S., Bogdanovich, S.P., and Myshkin, N.K., Tribological Behavior of Nanocomposites Produced by the Dispersion of Nanofillers in Polymer Melts, Trenie Iznos, 2007, vol. 28, no. 5, pp. 500–524 [J. Friction Wear (Engl. Transl.), 2007, vol. 28, no. 5, pp. 457].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.V. Panin, L.A. Kornienko, S. Vannasri, L.R. Ivanova, S.V. Shil’ko, 2010, published in Trenie i Iznos, 2010, Vol. 31, No. 5, pp. 492–499.
About this article
Cite this article
Panin, S.V., Kornienko, L.A., Vannasri, S. et al. Comparative analysis of the influence of nano- and microfillers of oxidized Al on the frictional-mechanical characteristics of UHMWPE. J. Frict. Wear 31, 371–377 (2010). https://doi.org/10.3103/S1068366610050090
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366610050090