Abstract
Petroleum needle coke modified by lithium additives is studied with a view to producing high-strength carbon materials. Modification by calcining with lithium carbonate changes the structure and properties of petroleum coke. Since the atomic radius of lithium is less than the distance between the layers of acicular phase in the petroleum coke, the added lithium is able to penetrate into the structure and form intercalated layers of composition Li x C y . Temperatures ensuring complete dissociation of the carbonate, reduction of the oxides, and intercalation of lithium during various stages in the calcining of petroleum coke are selected. The properties of pressed carbon materials derived from petroleum coke are assessed. Tests show that properties of the modified materials such as the strength and electrical conductivity are 10–15% greater than for standard samples.
Similar content being viewed by others
References
Obzor rynka neftyanogo koksa v Rossi i perspektivy ego razvitiya do 2013 goda (Survey of the Russian Market for Petroleum Coke and Its Prospects in 2013), OOO INFOMAIN RESECh, 2012.
Valyavin, G.G., Industrial production technology for acicular petroleum coke, Proizvodstvo uglerodnoi produktsii. Problemy obespecheniya uglerodistym syr’em (Production of Carbon Materials and Raw-Material Shortages), Moscow: RKhTU im. Mendeleeva, 2002, issue 1, pp. 51–61.
Sherryuble, V.G. and Seleznev, A.N., Pekovyi koks v uglerodnoi promyshlennosti (Pitch Coke in the Carbon Industry), Chelyabinsk: Izd. Tat’yana Lur’e, 2003.
Dostizheniya v proizvodstve i kon’yunktura potrebleniya elektrodnogo i igol’chatogo koksa v mirovoi praktike (Advances in Production and Market Conditions for Electrode and Needle Coke: A Global Review), Moscow: OAOA TsNIITEneftekhim, 2004.
Tverdokhlebov, V.P., Khramenko, S.A., Buryukin F.A., et al., Petroleum coke for the aluminum industry: Technology and properties, J. Sib. Fed. Univ., Chem., 2010, vol. 3, no. 4, pp. 369–386.
Syunyaev, Z.I., Proizvodstvo, oblagorazhivanie i primenenie neftyanogo koksa (Production, Enrichment, and Use of Petroleum Coke), Moscow: Khimiya, 1973.
Fialkov, A.S., Uglerod, mezhsloevye soedineniya i kompozity na ego osnove (Carbon, Intercalated Compounds, and Related Composites), Moscow: Aspekt Press, 1997.
Pis’mak, V.N., Lebedev, V.A., Loginova, I.V., et al., Introducing lithium carbonate in anode mass, Mat. IX regional’noi nauchno-prakticheskoi konferentsii Alyuminii Urala-2004 (Proceedings of Alyuminii Urala-2004: The Ninth Regional Conference on Aluminum), Krasnotur’insk, 2005, pp. 210–218.
Fisher, W.K. and Perruchoud, R.C., Influence of coke calcining parameters on petroleum coke quality, Light Met., 1985, pp. 811–824.
Bazhenov, A.A., Miklushevskii, V.V., and Vatulin, I.I., Reduction of lithium from its oxides by means of aluminum, Tez. dokl. Mezhdunarodnoi nauchno-prakticheskoi konferentsii Metallurgiya tsvetnykh metallov. Problemy i perspektivy (Abstracts of the Proceedings of an International Conference on Nonferrous Metallurgy: Problems and Prospects), Moscow: MISiS, 2009.
Ubbelode, A.R. and Lewis, F.A., Graphite and Its Crystal Compounds, Oxford: Clarendon Press, 1960.
Rapoport, M.B., Uglegrafitovye mezhsloinye soedineniya i ikh znachenie v metallurgii aluminiya (Intercalated Graphite Compounds and Their Role in Aluminum Metallurgy), Moscow: TsNIItsvetmetinformatsiya, 1967.
GOST (State Standard) 26132–84: Petroleum and Pitch Coke: Methods of Microstructural Assessment, 1984.
ISO 12981-1 International Standard: Carbonaceous Materials Used in the Production of Aluminium: Calcined Coke: Determination of the Reactivity to Carbon Dioxide, 2000.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.Yu. Bazhin, 2015, published in Koks i Khimiya, 2015, No. 4, pp. 32–37.
About this article
Cite this article
Bazhin, V.Y. Structural modification of petroleum needle coke by adding lithium on calcining. Coke Chem. 58, 138–142 (2015). https://doi.org/10.3103/S1068364X15040043
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068364X15040043