Skip to main content
Log in

Influence of coking parameters on the quality of tar for electrode-pitch production

  • Chemistry
  • Published:
Coke and Chemistry Aims and scope Submit manuscript

Abstract

Changes in the raw materials employed and the coking conditions affect the quality of the tar byproducts used in the production of electrode pitch. The decline in tar quality associated with faster pyrolysis of the vapor-gas products within the coking chamber is discussed. The factors affecting the properties of the newly formed coal tar are analyzed, and the results are compared with theoretical concepts regarding the transformation of the primary products of pyrolysis in the coking chamber. Practical recommendations are developed regarding the production of higher-quality tar. Systematic monitoring of the volume and temperature of the free space within the chamber permits improvement in tar quality, despite increasing coking rates in the production of higher-quality coke. With a tar density of 1185–1190 kg/m3, the moisture content falls to 2.0–5.5%, and the ash content to 0.08–0.11%.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Kovalev, E.T., Nauchnye osnovy i tekhnologiya pererabotki vysokokipyashchikh fraktsii kamennougol’noi smoly s poluchesniem politsiklicheskikh uglevodorodov (Scientific and Technological Aspects of the Processing of High-Boiling Coal-Tar Fractions to Produce Polycyclic Hydrocarbons), Kharkov: Kontrast, 2001.

    Google Scholar 

  2. Spravochnik koksokhimika. T. 3. Ulavlivanie i pererabotka khimicheskikh produktov koksovaniya (Handbook of Coke Chemistry, Vol. 3: Byproduct Capture and Processing), Kovalev, E.T., Ed., Kharkov: ID INZhEK, 2009.

    Google Scholar 

  3. McHenry, E.R., Industrial pitch quality of the future, Proceedings of the Fourth Australasian Aluminium Smelter Technology Workshop, Sydney, Australia, 1992.

    Google Scholar 

  4. Pityulin, I.N., Nauchno-tekhnologicheskie osnovy sozdaniya kamennougol’nykh uglerodsoderzhashchikh materialov dlya krupnogabaritnykh elektrodov (Scientific and Technological Aspects of the Production of Carbon-Bearing Coal-Tar Materials for Large Electrodes), Kharkov: IPTs Kontrast, 2004.

    Google Scholar 

  5. Mukhina, T.N., Barabanov, N.L., and Babash, S.E., Piroliz uglevodorodnogo syr’ya (Pyrolysis of Hydrocarbon Materials), Moscow: Khimiya, 1987.

    Google Scholar 

  6. Dorofeev, D.S., Miroshnichenko, A.M., and Khadzhinov, V.N., Influence of the coking conditions on the byproduct yield and quality, Koks Khim., 1937, no. 2, pp. 39–44.

    Google Scholar 

  7. Nakagawa, T., Carbon deposition in coke oven chamber: Influence of fine particles on formation rate of carbon deposits, Nippon Steel Technical Report, 2006, no. 7, pp. 63–68.

    Google Scholar 

  8. Baoquan, Z., Achieving good quality tar at Hamilton works, AISI Tech. 2009 Proceedings, 2009, no. 1, pp. 79–88.

    Google Scholar 

  9. Kustov, B.I. and Kolyandr, L.Ya., Koksovyi gaz (Coke-Oven Gas), Kharkov-Moscow: Metallurgizdat, 1947.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to V. N. Rubchevskiy.

Additional information

Original Russian Text © V.N. Rubchevskiy, S.A. Ovchinnikova, V.M. Volokh, R.A. Begma, L.P. Bannikov, V.V. Karchakova, 2014, published in Koks i Khimiya, 2014, No. 4, pp. 33–37.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Rubchevskiy, V.N., Ovchinnikova, S.A., Volokh, V.M. et al. Influence of coking parameters on the quality of tar for electrode-pitch production. Coke Chem. 57, 158–162 (2014). https://doi.org/10.3103/S1068364X14040061

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1068364X14040061

Keywords

Navigation