Abstract
The relation of the basic characteristics of coking batch to the hot strength CSR and reactivity CRI of coke is established. The plastic layer of the batch components influences CRI and CSR. The relation of the batch composition to CSR and CRI is determined. When using enrichment batch that contains ∼50.4% cokeforming coal, the best results are obtained: CSR = 61.8–62.3% and CRI = 26.4–26.7%.
Similar content being viewed by others
References
Kurunov, I.F., Kachestvo koksa, ego povedenie v domennoi pechi i vliyanie na ee rabotu (Quality of Coke, Its Behavior in the Blast Furnace, and Its Influence on Furnace Operation), OAO Chermetinformatiya, 2003, p. 8.
Ukhmylova, G.S., Problemy proizvodstva vysokokachestvennogo koksa dlya domennykh pechei (Production of High-Quality Coke for Blast Furnaces), OAO Chermetinformatsiya, 2004, pp. 8–12.
Influence of Coke Quality on the Gas Permeability in the Lower Part of the Blast Furnace, Nov. Chern. Metall. Rubezh., 2001, no. 2, p. 42.
Glushchenko, I.M., Prognoz kachestva koksa (Predicting Coke Quality), Moscow: Metallurgiya, 1976, pp. 51–68.
Goftman, M.V., Prikladnaya khimiya tverdogo topliva (Applied Chemistry of Solid Fuels), Moscow: Metallurgiya, 1963, pp. 395–399.
Author information
Authors and Affiliations
Additional information
Original Russian Text © G.R. Gainieva, L.D. Nikitin, M.M. Naimark, N.N. Nazarov, G.P. Tkachenko, 2008, published in Koks i Khimiya, 2008, No. 10, pp. 20–23.
About this article
Cite this article
Gainieva, G.R., Nikitin, L.D., Naimark, M.M. et al. Influence of batch composition and clinkering properties on the hot strength of coke and blast-furnace operation. Coke Chem. 51, 390–393 (2008). https://doi.org/10.3103/S1068364X08100037
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068364X08100037