Abstract
The compaction of powder of the Al–B–W in a copper shell is considered in this article. This material is supposed to fabricate, for example, grinding tool components or radiation protection elements. For this purpose, it is necessary to fabricate both short and long semifinished products, which requires the development and testing of various process flowsheets (methods) based on using static and dynamic loads, as well as their combinations. An analysis of experimental results shows the reality and possibility to implement the proposed flowsheets for fabricating tubular semifinished products of various sizes. The entire chain of their manufacture is considered from the production of powders to their compaction and sintering. To assess the quality of the sintered powder composition, metallographic investigations are performed. Their results show an almost complete absence of pores. Technology is developed that ensures the fabrication of new products, including long ones, from the Al–B–W powder composition.
Similar content being viewed by others
REFERENCES
Skvortsov, Yu.V., Mekhanika kompozitsionnykh materialov (Mechanics of Composite Materials), Samara: Uchebnaya Literatura, 2013.
Fridlyander, I.N., Kompozitsionnye materialy s metallicheskoi matritsei (Metal-Matrix Composite Materials), Moscow: Aviatsionnaya Promyshlennost’ VIAM, 1984.
Chawla, N. and Chawla, K., Metal Matrix Composites, Springer, 2006.
Komissar, O.N., Composite materials and technologies for the aerospace industry, Novosti Materialoved. Nauka Tekhn., 2013, no. 4, pp. 1–3.
Bulanov, I.M., Tekhnologiya raketnykh i aviakosmicheskikh konstruktsii iz kompozitsionnykh materialov (Technology of Rocket and Aerospace Structures Made of Composite Materials), Moscow: Bauman Mos. Gos. Tekh. Univ., 1998.
Tumanok, A., Kulu, P., Goljindin, D., and Rostsin, P., Disintergator as a machine for utilizing of metal chips to metal powder. The recycling of metals, in: Proc. III ASM International Conference and Exhibition, Barcelona, 1997, pp. 513–522.
Bakaev, A.G., Zdor, G.N., and Bobrova, D.A., Recycling of Borromini, Minsk: Nat. Acad. Sci. of Belarus, 2017, pp. 1–5.
Kim, J.H., Rumman, M.R., Rhee, C.K., Lee, J.G., Lee, M.K., and Hong, S.J., Fabrication and densification behavior analysis of metalizing targets using ZrO2 nanopowders by magnetic pulsed compaction, Mater. Trans., 2011, vol. 52, no. 6, pp. 1156–1162.
Materials and Service for Wear Protection, http://uploads/files/нardfacing-materials-durum.pdf (accessed October 1, 2018).
Vasilenko, I.Ya. and Vasilenko, O.I., Radiation and human, Probl. Global. Bezopasn., 2002, no. 6, pp. 13–16.
Ol’shanskii, G.S., Radiatsiya, radiatsionnye porazheniya, radiatsionnaya zashchita (Radiation, Radiation Damage, and Radiation Protection), Novokuznetsk: Novokuzn. Gos. Ped. Inst., 2002.
Boyko, I., Mironov, V., and Lapkovsky, V., Property and structure changes of sintered powder materials by the treatment in the pulse electromagnetic field, Proc. Euro PM, 2007, vol. 3, pp. 439–444.
Lymer, A., An engineering approach to the selection and application of mechanical seals: in Proc. 4th Int. Conf. on Fluid Sealing, United States, 1969, pp. 30–32.
Il’yushchenko, A.F., Poroshkovaya metallurgiya v Belarusi: Vyzov vremeni (Powder Metallurgy in Belarus: The Challenge of Time), Minsk: Belaruskaya Nauka, 2017.
Emeruwa, E., Jarrige, J., and Mexmain, J., Ferrite powder compaction with ultrasonic assistance, in: Euro Ceramics, London: Elsevier, 1989, pp. 1248–1252.
Belyaeva, I., Jusupov, R., and Glushchenkov, V., Problems of realization of static-dynamic technologies and ways of their solution, Key Eng. Mater., 2016, vol. 684, pp. 515–522.
Glushchenkov, V.A., Belyaeva, I.A., Burmistrov, A.E., and Mironov, V.A., RF Patent 2651094, 2018.
Kostryukov, E.E. and Yusupov, R.Yu., Design features of the small-scale PMI power unit, Key Eng. Mater., 2016, vol. 684, pp. 530–534.
Nishimura, T., Jinbo, K., Matsuo, Y., and Kimura, S., Forming of ceramic powders by cyclic-CIP. Effect of bias pressure, J. Amer. Ceram. Soc., 1990, vol. 98, pp. 742–745.
Belyi, I.V., Fertik, S.M., and Khimenko, L.T., Spravochnik po magnitno-impul’snoi obrabotke metallov (Handbook of Magnetic Pulse Processing of Metals), Kharkov: Vysshaya Shkola, 1977.
Barbarovich, Yu.K., Using the energy of a strong pulsed magnetic field for pressing powders, Poroshk. Metallurg., 1979, no. 2, pp. 24–31.
Belyaeva, I. and Mironov, V., Combined magnetic pulsed compaction of powder materials, Key Eng. Mater., 2017, vol. 746, pp. 235–239.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors claim that they have no conflict of interests.
Additional information
Translated by N. Korovin
About this article
Cite this article
Glushenkov, V.A., Belyaeva, I.A., Grechnikov, F.V. et al. Methods of Compaction of the Al–B–W Powder Composition in a Metal Shell. Russ. J. Non-ferrous Metals 60, 232–238 (2019). https://doi.org/10.3103/S1067821219030064
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821219030064