Abstract
A thermodynamic analysis of phase equilibria in the Cu–Al–Cr–O system is carried out. Thermodynamic modeling of the liquidus surface of the Cu2O–Al2O3–Cr2O3 oxide phase diagram is performed. To describe activities of an oxide melt, the approximation of the theory of subregular ionic solutions, the energy parameters of which were determined during modeling, is used. Melting characteristics of the CuCrO2 compound are also evaluated in the course of the calculation. Coordinates of invariant equilibria points implemented in the Cu2O–Al2O3–Cr2O3 ternary oxide system are established by the results of the calculation. Thermodynamic modeling of interaction processes in the Cu–Al–Cr–O system in occurrence conditions of a copper-based metal melt is also performed. The temperature dependence of the equilibrium constant of the reaction that characterizes the formation of the CuCrO2 solid compound from components of the metal melt of the Cu–Al–Cr–O system is determined. The temperature dependence for the first-order interaction parameter (by Wagner) of chromium and oxygen dissolved in liquid copper is found. The results of thermodynamic modeling for the Cu–Al–Cr–O system are presented in the form of the solubility surface of components in metal, which makes it possible to attribute the quantitative variations in the metal melt concentration with qualitative variations in the composition of forming interaction products. It is determined by the results of modeling that particles of the |Al2O3, Cr2O3|sol.sln solid solution are formed at valuable aluminum and chromium concentrations in the copper melt of the Cu–Al–Cr–O system as the main interaction product. The results of the investigation can be interesting for improving the technology process of smelting of chromium bronzes.
Similar content being viewed by others
References
Osintsev, O.E. and Fedorov, V.N., Med’ i mednye splavy. Otechestvennye i zarubezhnye marki (Copper and Copper Alloys. Domestic and Foreign Brands), Moscow: Mashinostroenie, 2004.
Barmak, K., Cabral, Jr.C., Rodbell, K.P., and Harper, J.M.E., On the use of alloying elements for Cu interconnect applications, J. Vac. Sci. Technol. B, 2006, no. 24, pp. 2485–2498.
Watanabe, Ch., Monzen, R., and Tazaki, K., Mechanical properties of Cu–Cr system alloys with and without Zr and Ag, J. Mater. Sci., 2008, no. 43 (3), pp. 813–819.
Islamgaliev, R.K., Nesterov, K.M., Bourgon, J., Champion, Y., and Valiev, R.Z., Nanostructured Cu–Cr alloy with high strength and electrical conductivity, J. Appl. Phys., 2014, no. 115, pp. 194301–194301-4.
Mysik, R.K., Brusnitsyn, S.V., Sulitsin, A.V., Ivkin, M.O., and Karpinskii, A.V., Features of copper alloys cast bars production, Vestn. Yuzh.-Ural. Gos. Univ. Ser. Metall., 2014, no. 2, pp. 26–34.
Dammschroder A., Maurell-Lopez S., Friedrich B. Development of process slags for Cu–Cr-recycling processes, in: Proc. EMC 2009, Pennsylvania: 2009, pp. 1–16.
Kulikov, I.S., Raskislenie metallov (Deoxidation of Metals), Moscow: Metallurgiya, 1975.
Mikhailov, G.G., Leonovich, B.I., and Kuznetsov, Yu.S., Termodinamika metallurgicheskikh protsessov i sistem (Thermodynamics of Metallurgical Processes and Systems), Moscow: MISIS, 2009.
Mikhailov, G.G., Trofimov, E.A., and Sidorenko, A.Yu., Fazovye ravnovesiya v mnogokomponentnykh sistemakh s zhidkimi tsvetnymi metallami (Phase Equilibria in Multicomponent Systems with Liquid Nonferrous Metals), Moscow: MISIS, 2009.
Decterov, S.A., Jung, I.-H., Jak, E., Kang, Y.-B., Hayes, P., and Pelton, A.D., Thermodynamic modeling of the Al2O3–CaO–CoO–CrO–Cr2O3–FeO–Fe2O3–MgO–MnO–NiO–SiO2–S system and applications in ferrous process metallurgy, in: Proc. VII Int. Conf. Molten Slags Fluxes & Salts, Johannesburg: 2004, pp. 839–850.
Yang, Sh., Li, J., Zhang, L., Peaslee, K., and Wang, Z., Evolution of MgO·Al2O3 based inclusions in alloy steel during the refining process, Metall. Min. Ind., 2010, no. 2 (2), pp. 87–92.
Samoilova, O.V., Makrovets, L.A., Mikhailov, G.G., and Trofimov, E.A., Thermodynamic analysis of the Cu–Si–Ni–O system, Russ. J. Non-Ferrous Met., 2012, vol. 53, no. 3, pp. 223–228.
Samoylova, O.V., Mikhailov, G.G., Makrovets, L.A., Trofimov, E.A., and Sidorenko, A.Yu., Thermodynamic modeling of the liquidus surface of the phase diagram of the Cu2O–Al2O3–ZrO2 system, Vestn. Ural. Gos. Univ. Ser. Metall., 2015, no. 4, pp. 15–21.
Khimicheskaya entsiklopediya. V 5 tomakh tom 2 (Chemical Encyclopedia. 5 vols, vol. 2), Knunyants, I.L., Ed., Moscow: Sov. Entsiklopediya, 1990.
Kubaschewski, O. and Alcock, C.B., Metallurgical Thermochemistry, Oxford: Pergamon, 1979.
Fiziko-khimicheskie svoistva okislov: Spravochnik (Physico-Chemical Properties of Oxides: Reference Book), Samsonov, G.V., Ed., Moscow: Metallurgiya, 1969.
Misra, S.K. and Chaklader, A.C.D., The system copper oxide–alumina, J. Amer. Cer. Soc., 1963, no. 46 (10), p. 509.
Amrute, A.P., Lodziana, Z., Mondelli, C., Krumeich, F., and Perez-Ramirez, J., Solid-state chemistry of cuprous delafossites: synthesis and stability aspects, Chem. Mater., 2013, no. 25, pp. 4423–4435.
Mudenda, S., Kale, G.M., and Hara, Y.R.S., Rapid synthesis and electrical transition in p-type delafossite CuAlO2, J. Mater. Chem. C, 2014, no. 2, pp. 9233–9239.
Gadalla, A.M.M. and White, J., The system CuO–Cu2O–Cr2O3 and its bearing on the performance of basic refractories in copper-melting furnaces, Trans. Brit. Ceram. Soc., 1964, no. 63 (10), pp. 535–552.
Ust’yantsev, V.M., Mar’evich, V.P., and Perepelitsyn, V.A., Formation of copper chromite in chromium–magnesite refractories during service in copper-smelting aggregates, Ogneupory, 1971, no. 10, pp. 28–32.
Vlach, K.C., You, Y.-Z., and Chang, Y.A., A thermodynamic study of the Cu–Cr–O system by the EMF method, Thermochim. Acta, 1986, no. 103 (2), pp. 361–370.
Poienar, M., Hardy, V., Kundys, B., Singh, K., Maignan, A., Damay, F., and Martin, Ch., Revisiting the properties of delafossite CuCrO2: a single crystal study, J. Solid State Chem., 2012, no. 185, pp. 56–61.
Slag Atlas, Dusseldorf: Stahleisen, 1995, 2nd ed.
Samoilova, O.V., Mikhailov, G.G., Trofimov, E.A., and Makrovets, L.A., Thermodynamic simulation and an experimental study of the possibility of synthesizing hardened Cu–Zr–O alloys, Russ. Metall. (Metally), 2016, no. 9, pp. 864–868.
Mikhailov, G.G., Makrovets, L.A., and Samoilova, O.V., Thermodynamic description of phase equilibria in the Cu–Al–Zr–O system under the condition of metal melt existence, Vestn. Yuzhn.-Ural. Gos. Univ. Ser. Metall., 2016, no. 3, pp. 11–17.
Linchevskii, B.V., Termodinamika i kinetika vzaimodeistviya gazov s zhidkimi metallami (Thermodynamics and Kinetics of Interaction between Gases and Liquid Metals), Moscow: Metallurgiya, 1986.
Tanahashi, M., Furuta, N., Taniguchi, T., Yamauchi, Ch., and Fujisawa, T., Standard Gibbs free energy of formation of MnO-saturated MnO · Cr2O3 solid solutions at 1873 K, ISIJ Int., 2003, no. 43 (1), pp. 7–13.
Ponweiser, N., Lengauer, Ch.L., and Richter, K.W., Re-investigation of phase equilibria in the system Al–Cu and structural analysis of the high-temperature phase η1-Al1–δCu, Intermetallics, 2011, no. 19, pp. 1737–1746.
Chakrabarti, D.J. and Laughlin, D.E., The Cr–Cu (chromium–copper) system, Bull. Alloy Phase Diagr., 1984, no. 5 (1), pp. 59–68.
Clavaguera-Mora, M.T., Touron, J.L., Rodriguez-Viejo, J., and Clavaguera, N., Thermodynamic description of the Cu–O system, J. Alloys Compd., 2004, no. 377, pp. 8–16.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.V. Samoilova, L.A. Makrovets, G.G. Mikhailov, 2017, published in Izvestiya Vysshikh Uchebnykh Zavedenii, Tsvetnaya Metallurgiya, 2017, No. 5, pp. 19–27.
About this article
Cite this article
Samoilova, O.V., Makrovets, L.A. & Mikhailov, G.G. Phase Equilibria in Liquid Metal of the Cu–Al–Cr–O System. Russ. J. Non-ferrous Metals 58, 579–585 (2017). https://doi.org/10.3103/S1067821217060116
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821217060116