Abstract
The possibility of surface nanostructuring of metal wares by a flexible elastic tool (rotating wire brushes (RWBs)) is investigated. It is established that a thin layer of the amorphized material is formed on a surface under definite treatment modes and a texture most acute in surface layers is formed. Simultaneously with hardening of the surface layer, functional coatings of various indentations from 3–5 to 40–45 μm thick can be deposited using the RWBs.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Panin, V.E. and Panin, A.V., Fiz. Mezomekh., 2005, vol. 8, no. 5, p. 7.
Chukin, M.V., Korchunov, A.G., Golubchik, E.M., et al., Vestn. Magnitogorsk Gos. Tekh. Univ., 2012, no. 4, p. 61.
Makarov, A.V. and Korshunov, L.G., Izv. Vyssh. Uchebn. Zaved., Fiz., vol. 24, no. 3, p. 301.
Makarov, A.V., Pozdeeva, N.A., and Malygina, I.Yu., Deform. Razrush. Mater., 2010, no. 5, p. 32.
Askinazi, B.M., Uprochnenie i vosstanovlenie detalei elektromekhanicheskoi obrabotkoi (Hardening and Reduction of Articles by Electrochemical Treatment), Leningrad: Mashinostroenie, 1977.
Garkunov, D.N. and Lozovskii, V.I., USSR Inventor’s Certificate No. 115744, 1958.
Perepichka, E.V., Ochistno-uprochnyayushchaya obrabotka izdelii shchetkami (Cleaning-Hardening Treatment of Wares by Brushes), Moscow: Mashinostroenie, 1989.
Kurguzov, Yu.I. and Papshev, D.D., Vestn. Mashinostr., 1986, no. 4, p. 54.
Proskuryakov, Yu.G. and Ershov, B.C., in Issledovanie tekhnologicheskikh protsessov uprochnyayushchekalibruyushchei i formoobrazuyushchei obrabotki metallov: Mezhvuzovskii sbornik (Investigation into Production Processes of Hardening-Calibrated and Forming Treatment of Metals), Rostov-on-Don: Inst. Agricult. Mech. Eng., 1970, p. 144.
Abinder, A.A., USSR Inventor’s Certificate No. 57162, 1940.
Kadoshnikov, V.I. and Mironov, Yu.V., USSR Inventor’s Certificate No. 1206068, 1986.
Belevskii, L.S., Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1987, no. 7, p. 104.
Belevskii, L.S., Plasticheskoe deformirovanie poverkhnostnogo sloya i formirovanie pokrytiya pri nanesenii gibkim instrumentom (Plastic Deforming the Surface Layer and Coating Formation under the Deposition by Flexible Tool), Magnitogorsk: Lyceum Russ. Acad. Sci., 1996.
Antsupov, V.P., Teoriya i praktika plakirovaniya gibkim instrumentom (Theory and Practice of Cladding by Flexible Tool), Magnitogorsk: Magnitogorsk State Tech. Univ., 1999.
Zavalishchin, A.N., Smirnov, O.M., and Tulupov, S.A., Modifikatsiya poverkhnosti metallicheskikh izdelii s ispol’zovaniem pokrytii (Surface Modification of Metallic Wares Using Coatings), Moscow: Orbita-M, 2012.
Platov, S.I., Dema, R.R., and Zotov, A.V., Vestn. Magnitogorsk Gos. Tekh. Univ., 2013, no. 1, p. 69.
Rybakova, L.M. and Kuksenova, L.I., Struktura i iznosostoikost’ metalla (Structure and Wear Resistance of Metal), Moscow: Mashinostroenie, 1982.
Belevskii, L.S., Tulupov, S.A., Tulupov, O.N., and Belevskii, I.L., RF Patent 2362664, 2009.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.S. Belevskii, I.V. Belevskaya, Yu.Yu. Efimova, 2014, published in Izvestiya VUZ. Poroshkovaya Metallurgiya, 2014, No. 1, pp. 70–76.
About this article
Cite this article
Belevskii, L.S., Belevskaya, I.V. & Efimova, Y.Y. Friction nanostructuring treatment of metallic surfaces and deposition of functional coatings using a flexible tool. Russ. J. Non-ferrous Metals 56, 359–364 (2015). https://doi.org/10.3103/S1067821215030025
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821215030025