Abstract
The influence of alloying additives Al(OH)3 and TiO2 on the structure and properties of uranium dioxide fuel pellets is investigated. It is established that their introduction improves the characteristics of the macrostructure and microstructure of fuel pellets and positively affects their properties. For example, the grain size in the fuel pellet increases to 39 mm (instead of 10–15 mm in the case of usual technology), the number of large (>10 mm) pores decreases, and the strength and thermal conductivity increase slightly.
Similar content being viewed by others
References
Khalatov, S.V., Atom. Tekhn. Rubezh., 2007, no. 8, p. 32.
Radford, K. and Pope, J., J. Nucl. Mater., 1983, vol. 116, no. 2, p. 305.
Saltykov, S.A., Stereometricheskaya metallografiya (Stereometric Metallography), Moscow: Metallurgiya, 1976.
Dubrovin, K.P., Ivanov, U.G., Fotieva, N.L., et al., Opyt ekspluatatsii TVS s tabletochnym toplivom v reaktorakh VVER-440 (Experience of Operation of Fuel Assemblies with Pellet Fuel in VVER-440 Reactors), Moscow: Inst. Atom. Energy of SSSR, 1986.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.S. Panov, V.Yu. Lopatin, L.V. Myakisheva, V.V. Malovik, V.V. Martynov, 2012, published in Izvestiya VUZ. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 2012, No. 4, pp. 38–42.
About this article
Cite this article
Panov, V.S., Lopatin, V.Y., Myakisheva, L.V. et al. Fuel pellets based on uranium dioxide and alloyed with nanodispersed additives of Al(OH)3 and TiO2 . Russ. J. Non-ferrous Metals 55, 289–293 (2014). https://doi.org/10.3103/S1067821214030146
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821214030146