Abstract
The results of pilot and analytical researches of the stress condition diagram near the pellet ends upon its pushing out from the mold after compaction to reveal the causes of crack formation are presented. It is shown that free surfaces can appear on the green pellet end from the lower punch, due to which a dangerous boundary between the loaded and unloaded parts of a green pellet can be formed which can lead to cracking at certain compacting procedures. The numerical investigations for establishing the maximal shear stresses in a green pellet upon pushing out according to standard regulations and with counterpressure are performed. A technical proposal on the expediency of using the counterpressure upon pushing out after compacting the pellets from uranium dioxide powders is substantiated. It is established that the application of counterpressure excludes the formation of end cracks in green pellets in a wide range of compaction pressures and with the use of various binders and opens up prospects for compacting powders without binders and green pellets without chamfers.
Similar content being viewed by others
References
Gorbushin, A.V., Syrnev, B.V., Rusin, Yu.G., and Shevchenko, G.M., Tsvetn. Met., 2011, no. 1, p. 80.
Gorbushin, A.V., Rusin, Yu.G., and Syrnev, B.V., Vestn. Vost.-Kazakh. Gos. Tekh. Univ., 2008, no. 4, p. 8.
Perel’man, V.E., Formovanie poroshkovykh materialov (Formation of Powder Materials), Moscow: Metallurgiya, 1979.
Tomsen, E., Yang, Ch., and Kobayashi, Sh., Mechanics of Plastic Deformation in Metal Processing, MacMillan: New York, 1968.
Bocharov, A.S., Optimization of Technology of Fuel Pellets Made of Uranium Dioxide for Provision of Stability of Their Quality in Conditions of Large-Scale Production, Cand. Sci. (Eng.) Dissertation, Moscow: MISiS, 2005.
Gorbushin, A.V., Rusin, Yu.G., Kirilov, E.V., and Roganov, A.G., Kazakhstan Patent 21786, 2008.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Gorbushin, B.V. Syrnev, Yu.G. Rusin, G.M. Shevchenko, 2012, published in Izvestiya VUZ. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 2012, No. 4, pp. 17–21.
About this article
Cite this article
Gorbushin, A.V., Syrnev, B.V., Rusin, Y.G. et al. Investigation into the influence of pushing-out regulation during the formation of powders on the quality of uranium dioxide wares. Russ. J. Non-ferrous Metals 55, 277–281 (2014). https://doi.org/10.3103/S1067821214030043
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821214030043