Skip to main content
Log in

Improvement of thermal modes of shaft furnaces of nonferrous metallurgy

  • Energy Saving and Environmental Protection
  • Published:
Russian Journal of Non-Ferrous Metals Aims and scope Submit manuscript

Abstract

Based on the experimental data of research into the thermal and gas-dynamic operation of shaft melting furnaces of nonferrous metallurgy, the main regularities in the development of thermal and gas-dynamic processes over the longitudinal and transverse sections of the aggregate are established. It is suggested to vary the nonuniformity of conditions of the heat treatment of starting materials by improvement of the uniformity of gas distribution due to the optimization of the tuyere supply of air blasting and materials with the use of distributive facilities. The efficiency of using a series of verified methods to vary the production parameters of the shaft smelting is shown, including the organized selection of gases from the layer of batch materials; using the energy of the acoustic field; heating the air blast to a temperature no lower than 300°C; enriching the air blast with oxygen; and introducing additions of natural gas, which is burned immediately in the batch layer.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Kitaev, B.I., Teploobmen v shakhtnykh pechakh (Heat Exchange in Shaft Furnaces), Moscow: Metullurgizdat, 1945.

    Google Scholar 

  2. Glinkov, M.A. and Glinkov, G.M., Obshchaya teoriya teplovoi raboty pechei: Ucheb. dlya vuzov. 2-e izdanie (General Theory of Thermal Operation of Furnaces: Textbook for Higher Schools, 2nd Edition), Moscow: Metullurgiya, 1990.

    Google Scholar 

  3. Gordon, Ya.M., Bokovikov, B.A., Shvydkii, V.S., and Yaroshenko, Yu.G., Teplovaya rabota shakhtnykh pechei i agregatov s plotnym sloem (Thermal Operation of Shaft Furnaces and Aggregates with a Dense Layer), Moscow: Metullurgiya, 1989.

    Google Scholar 

  4. Mekhanika zhidkosti i gaza: Uchebnoe posobie dlya vuzov (Mechanics of Fluid and Gas: Textbook for Higher Schools) Shvydkii, V.S, Ed., Moscow: Akademkniga, 2003.

    Google Scholar 

  5. Spirin, N.A., Ovchinnikov, Yu.N., Shvydkii, V.S., and Yaroshenko, Yu.G., Teploobmen i povyshenie effektivnosti domennoi plavki (Heat Exchange and Increase in Efficiency of Blast Smelting), Yekaterinburg: UGTU-UPI, 1995.

    Google Scholar 

  6. Lisienko, V.G., Lobanov, V.I., and Kitaev, B.I., Teplofizika metallurgicheskikh protsessov (Thermal Physics of Metallurgical Processes), Moscow: Metallurgiya, 1982.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to V. I. Matyukhin.

Additional information

Original Russian Text © V.I. Matyukhin, Yu.G. Yaroshenko, O.V. Matyukhin, 2010, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2010, No. 3, pp. 57–64.

About this article

Cite this article

Matyukhin, V.I., Yaroshenko, Y.G. & Matyukhin, O.V. Improvement of thermal modes of shaft furnaces of nonferrous metallurgy. Russ. J. Non-ferrous Metals 51, 255–262 (2010). https://doi.org/10.3103/S1067821210030119

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1067821210030119

Key words

Navigation