Abstract
An experimental installation for obtaining Sn-Pb and Sn-Cu solder powders by the centrifugal atomization of a melt film is described. The effect of various parameters on the median diameter D 50 and the uniformity of the POS-61 powder is studied. It is found that the latter becomes worse with an increase in the disk rotary speed, and the value of D 50 decreases, reaching 36 μm at a speed of 25000 rpm. The optimum height of the film of a melt jet at which the minimum size of powder particles is observed is experimentally determined (15 mm). The effect of oxygen on the oxidation level, fluidity, and bulk density of the powder is studied. At an oxygen content of 0.01 vol % in the atomization medium, the oxygen concentration in the POS-61 powder does not exceed 0.004 wt %, the fluidity of the powder is 11 s, and its bulk density is 4.98 g/m3.
Similar content being viewed by others
References
Yule, A.J. and Dunkley, J.J., Atomization of Melts for Powder Production and Spray Deposition, Oxford: Clarendon, 1994.
Sheikhaliev, Sh.M., Kuzmin, V.V., and Ustinov, V.M., Poroshk. Metall., 1990, no. 5, p. 8.
Sekine, Sh. and Kuwabara, Y., Japan Patent JP2002 3217212, 2002.
Sheikhaliev, Sh.M. and Beryukhov, A.V., RF Patent 2302926, 2007.
Sheikhaliev, Sh.M., Sharonov, I.V., and Karpov, M.P., Poroshk. Metall., 1989, no. 6, p. 16.
Sheikhaliev, Sh.M. and Dunkley, J.J., in Advances in Powder Metallurgy and Particulate Materials: Proc. Int. Conf. and Exhibition on Powder Metallurgy and Particulate Materials, Seattle: Metal Powder Industries Federation Princeton (NJ), 1996, vol. 1, p. 79.
Champagne, B. and Anders, R., in Advances in Powder Metallurgy and Particulate Materials: Proc. Int. Conf. and Exhibition on Powder Metallurgy and Particulate Materials, Seattle: Metal Powder Industries Federation Princeton (NJ), 1992, vol. 1, p. 79.
Sheikhalieva, Z. I. and Sheikhaliev, Sh. M., in Avtomatizatsiya i progressivnye tekhnologii: Trudy V mezhotraslevoi nauchno-tekhnicheskoi konferentsii (Automation and Advanced Technology: Proc. V Interindustry Sci. and Tech. Conf.), Novoural’sk: NGTI, 2007, vol. 1, p. 145.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.A. Shemyakina, Z.I. Sheikhalieva, Sh.M. Sheikhaliev, 2010, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2010, No. 3, pp. 52–57.
About this article
Cite this article
Shemyakina, O.A., Sheikhalieva, Z.I. & Sheikhaliev, S.M. Obtaining solder powders by centrifugal atomization of melt. Russ. J. Non-ferrous Metals 51, 250–254 (2010). https://doi.org/10.3103/S1067821210030107
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821210030107