Abstract
A comparative analysis of the variation in factors of fatigue resistance is carried out for some pure metals (copper, zinc, cadmium, titanium, etc) depending on the frequency of loading cycles under the bending strain of rotating samples with diameters of 5 and 2 mm. Curves of fatigue and microstructure variations under cyclic loading are shown.
Similar content being viewed by others
References
Sokolov, L.D., Skudnov, V.A., Solenov, V.M., et al., Mekhanicheskie svoistva redkikh metallov (Mechanical Properties of Rare Metals), Moscow: Metallurgiya, 1972.
Shetulov, D.I., Magidov, M.B., Myasnikov, A.M. et al., Izv. AN SSSR. Metally, 1970, no. 6, p. 165.
Shibarov, V.V., Shetulov, D.I., and Sokolov, L.D., Fiz.-Khim. Mekh. Mater., 1971, no. 3, p. 29.
Shibarov, V.V., Shetulov, D.I., and Sokolov, L.D., Fiz. Khim. Obrab. Mater., 1972, no. 2, p. 147.
Shibarov, V.V., Shetulov, D.I., Myasnikov, A.M., and Sokolov, L.D., Fiz.-Khim. Obrab. Mater., 1972, no. 5, p. 74.
Shetulov, D.I., Murav’ev, S.N., and Vavilov, D.Yu., Ustalostnaya povrezhdaemost’ vysokoprochnykh splavov (Fatigue Damageability of High-Strength Alloys), Nizhnii Novgorod: Vektor TiS, 2005.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Myl’nikov, D.I. Shetulov, E.A. Chernyshov, 2010, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2010, No. 3, pp. 40–45.
About this article
Cite this article
Myl’nikov, V.V., Shetulov, D.I. & Chernyshov, E.A. Variation in factors of fatigue resistance for some pure metals as a function of the frequency of loading cycles. Russ. J. Non-ferrous Metals 51, 237–242 (2010). https://doi.org/10.3103/S1067821210030089
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821210030089