Abstract
Data on the chemical compositions, structures, properties, and application of industrial carbide Ferro-TiC (United States) and Ferro-Titanit (Germany) steels, which are fabricated by sintering, are presented. The technologies of obtaining such materials based on the processes of sintering under pressure, namely, hot isostatic pressing (HIP), hot extrusion (HE), and hot stamping (HS) are developed. Using the HIP and HE methods, high-speed steel-TiC composites are produced in pilot scales (UkrNIISpetsstal’ and Dneprospetsstal’, Zaporozh’e, Ukraine). In Ukraine and Russia, technologies for obtaining the HS-based carbide steel with the use of TiC and Cr3C2 are developed. The prospects for fabrication of new types of composite materials with the use of boron carbide are shown.
Similar content being viewed by others
References
Zubkova, V.T., Ternovoi, Yu.F., and Nogovitsyn, A.V., in Porodorazrushayushchii i metalloobrabatyvayushchii instrument: Tekhnika i tekhnologiya ego izgotovleniya: Sbornik nauchnykh trudov (Rock-Destroying and Metal-working Tools: Technique and Technology of Its Fabrication: Collected Articles), Kiev: IPM NAN Ukrainy, 2004, issue 7, pp. 267–271.
Gurevich, Yu.G., Narva, V.K., and Frage, N.R., Karbidostali (Carbide Steels), Moscow: Metallurgiya, 1988.
Kyubarsepp, Ya., Tverdye Splavy So Stal’Noi Svyazkoi (Hard Alloys with Steel Binder), Tallinn: Valgus-TTU, 1991.
Schaft, W. and Wieters, K.-P., Powder metallurgy. Processing and materials, Shrewsbury: Liveseys, 1997.
Poznyak, L.A., Instrumental’nye stali (Tool Steels), Kiev: Naukova Dumka, 1996.
Ferro-TiC* Steel Bounded Carbides // www.ferrotic.com/wearparts.html.
Ferro-Titanit* // www.ferro-titanit.com/en/home/-8k.
Baglyuk, G.A., Scientific and Technological Principles of Obtainment of the Articles Made of Powder Materials Based on Heterogeneous Iron-Carbon Alloys with Increased Wear Resistance, Doctoral (Eng.) Dissertation, Kiev: IPM NAN Ukrainy, 2004.
Queeney, R.A., Powder Met. Part. Met, Princeton: MPIF, 1992, vol. 8, pp. 89–92.
Maslyuk, V.A. and Napara-Volgina, S.G., Poroshk. Metall., 1999, nos. 9/10, pp. 108–114.
Napara-Volgina, S.G., Orlova, L.N., Mamonova, A.A., and Dzeganovskii, V.P., Poroshk. Metall., 1997, nos. 1/2, pp. 103–111; nos. 9/10, pp. 109–115.
Napara-Volgina, S.G., Orlova, L.N., Kud’, V.K., et al., Poroshk. Metall., 1998, nos. 9/10, pp. 93–97.
Napara-Volgina, S.G., Orlova, L.N., and Skuratovskii, A.K., Poroshk. Metall., 1999, nos. 1/2, pp. 62–68.
Maslyuk, V.A., Napara-Volgina, S.G., and Kud’, V.K., Poroshk. Metall., 2000, nos. 11/12, pp. 33–38.
Dorofeev, Yu.G., Gasanov, B.G., Dorofeev, V.Yu., et al., Promyshlennaya tekhnologiya goryachego pressovaniya poroshkovykh izdelii (Industrial Technology of Hot Pressing of Powdered Articles), Moscow: Metallurgiya, 1990.
Maslyuk, V.A., Napara-Volgina, S.G., Orlova, L.N., et al., Poroshk. Metall., 2006, nos. 1/2, pp. 26–35.
Pavlygo, T.M., Sakhnenko, A.V., Sakhnenko, S.A., and Serdyuk, G.G., Poroshk. Metall., 2000, nos. 3/4, pp. 84–104.
Pavligo, T.M., Serdyuk, G.G., Svistun, L.I., et al., Powder Metal. Metal. Ceram, 2005, nos. 7/8, pp. 341–347.
Pavlygo, T.M., Serdyuk, G.G., Martyukhin, I.D., et al., Tekhnika mashinostroeniya (Technique of Mechanical Engineering), Moscow: NTP “Virazh-Tsentr”, 2006.
Plomod’yalo, R.L., Izv. Vyssh. Uchebn. Zaved., Sev.-Kavk. Reg., Tekhn. Nauki, 2008, no. 2, pp. 68–71.
Pavligo, T.M., Plomodyalo, L.G., Plomodyalo, R.L., et al., Powder Metal. Metal. Ceram, 2004, nos. 5/6, pp. 223–229.
Svistun, L.I., Plomod’yalo, L.G., and Plomod’yalo, R.L., et al., RF Patent 49476, 2005.
Svistun, L.I., Iznosostoikie spechennye materialy “metallkarbid titana”: Uchebnoe posobie (Wear-Resistant Sintered Materials “Metal-Titanium Carbide”: Tutorial), Krasnodar: KubGTU, 2007.
Dorofeev, Yu.G., Dinamicheskoe goryachee pressovanie poristykh poroshkovykh zagotovok (Dynamic Hot Pressing of Porous Powder Billets), Moscow: Metallurgiya, 1977.
Svistun, L.I., Plomod’yalo, R.L., Dmitrenko, D.V., et al., RF Patent 67494, 2007.
Plomod’yalo, R.L., Abstracts of Papers, in Materialy i tekhnologii XXI veka: Sbornik dokladov VI Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii (Materials and Technologies of the XXI Century: Collected Articles of VI Int. Sci. Tech. Conf.), Pensa: ANOO “Privolzhskii Dom Znanii”, 2008, pp. 5–8.
Plomod’yalo, R.L., Abstracts of Papers, in Mekhaniki-XXI veku: Sbornik dokladov VII Vserossiiskoi nauchnotekhnicheskoi konferentsii (Mechanical Engineers-to XXI Century: Collected Articles of VII All-Russia Sci. Tech. Conf.), Bratsk: BrGU, 2008, pp. 170–172.
Dorofeev, V.Yu. and Egorov, S.N., Mezhchastichnoe srashchivanie pri formirovanii poroshkovykh goryachedeformirovannykh materialov (Mechanical Intergrowth during the Formation of Powdered Hot-Deformed Materials), Moscow: ZAO “Metallurgizdat”, 2003.
Plomod’yalo, R.L., Obtainment of Wear-Resistant Powdered Carbide Steel Based on High-Speed Steel and Titanium Carbide by the Method of Hot Stamping, Cand. (Eng.) Diss., Novocherkassk: YuRGTU (NPI), 2008.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.I. Svistun, 2009, published in Izvestiya VUZ. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 2009, No. 3, pp. 41–50.
About this article
Cite this article
Svistun, L.I. Constructional carbide steels: A review of their fabrication, properties, and application. Russ. J. Non-ferrous Metals 51, 188–196 (2010). https://doi.org/10.3103/S1067821210020215
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821210020215