Abstract
The corrosion-electrochemical behavior of the PT-7M titanium alloy after oxynitriding in a 0.9% aqueous solution of sodium chloride is investigated. Oxynitriding is performed by modifying the oxygen of the nitride layer formed upon thermal-diffusion saturation in the atmosphere of molecular nitrogen. It is established that the protective properties of the alloy are determined by the quantitative ratio of the oxynidride and oxide phases in the modified surface layer. It is shown that, as the content of the oxynitride phase in the composition of the surface layer increases and the oxygen component in its composition decreases, the anticorrosion characteristics of the alloy surface are improved.
Similar content being viewed by others
References
Narayanan, R. and Seshadri, S.K., Corros. Sci., 2007, vol. 49, p. 542.
Rahman, M., Reid, I., Duggan, P., et al., Surf. Coat. Technol, 2007, vol. 201, p. 4865.
Sundarajan, T. and Praunseis, Z., Mater. Tehnol, 2004, vol. 38, nos. 1–2, p. 19.
Pogrelyuk, I.M., Fedirko, V.M., and Tkachuk, O.V., Fiz.-Khim. Mekh. Mater., 2008, vol. 44, no. 1, p. 56.
Glaser, A., Surnev, S., Netzer, F.P., et al., Surf. Sci., 2007, vol. 601, p. 1153.
Vaz, F., Cerqueira, P., Rebouta, L., et al., Solid Films, 2004, vol. 447–448, p. 449.
Voitovich, R.F., Okislenie karbidov i nitridov (Oxidation of Carbides and Nitrides), Kiev: Naukova Dumka, 1981.
Burstein, G.T., Liu, C., and Souto, R.M., Biomater, 2005, vol. 26, p. 245.
Shveikin, G.P., Alyamovskii, S.I., Zainulin, Yu.G., et al., in Soedineniya peremennogo sostava i ikh tverdye rastvory (Compounds of the Variable Composition and Their Solid Solutions), Sverdlovsk: UNZ AN SSSR, 1984.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.N. Pohrelyuk, O.V. Tkachuk, R.V. Proskurnyak, 2009, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2009, No. 4, pp. 52–55.
About this article
Cite this article
Pohrelyuk, I.N., Tkachuk, O.V. & Proskurnyak, R.V. The corrosion-electrochemical behavior of the PT-7M titanium alloy after oxynitriding. Russ. J. Non-ferrous Metals 50, 373–376 (2009). https://doi.org/10.3103/S1067821209040129
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821209040129