Abstract
The paper presents empirical relations between the turning performance characteristics, process variables, technical restrictions, and machining costs. The authors of the paper have performed calculations of cutting conditions and cutting edge geometry for polycrystalline cubic boron nitride inserts, analyzed the influence of cast iron hardness and technical restrictions on the assessment parameters.
Similar content being viewed by others
References
Jacobs, H.J., Jacob, E., and Kochan, D., Spanungsoptimierung. Verfahrengestaltung durch technologische Optimierung in der Spantechnik. 1. Auflage. Berlin: VEB Verlag Technik, 1977.
Kravchenko, Yu.G., Pin’kovskii, S.G., and Savchenko, Yu.V., Statement of Optimization problem for Metal Cutting Parameters, in Rezanie i instrument v technologicheskikh systemakh, Mezhdynarodnyi naucho-tekhnicheskii sbornik (Cutting and Tools in Technological Systems. Collected International Scientific and Technical Papers), Kharkiv: NTU “KhAI”, 2005, issue 68, pp. 273–275.
Kravchenko, Yu.G. and Arkhipov, O.V., USSR Inventor’s Certificate no. 1,710,203, Byull. Izobret., 1992, no. 5.
Kravchenko, Yu.G. and Arkhipov, O.V., USSR Inventor’s Certificate no. 1,773,573, Byull. Izobret., 1992, no. 41.
Kravchenko, Yu.G., Rational Turning Conditions for Forming Rolls Made of Cast Iron, Metall. Gornorud. Promyshl., 1997, no. 2, pp. 57–60.
Didyk, R.P., Kravchenko, Yu.G., and Meleshchik, V.A., Cutting Forces and Temperatures in Turning of Wear-resistant Cast irons Using Composite Tool Materials, in Natsional’naya gornaya akademiya Ukrainy, Sb. nauchn. tr. (National Mining Academy of Ukraine, Collected Research Papers), Dnipropetrovsk: Navchal’na Knyga, 2002, no. 13, vol. 2, pp. 114–117.
Kravchenko, Yu.G. and Savchenko, Yu.V., Reliability of Composite Inserts in Turning Chilled Cast Irons, in Vysoki Tekhnologii v mashinobuduvanni. Zb. nauk. pr. (High Technologies in Machine Building. Collected Research Papers), Kharkiv: NTU “KhPI”, 2005, issue 1 (10), pp. 99–104.
Novikov, N.V. (Ed.), Instrumenty iz sverkhtverdykh materialov (Tools of Superhard Materials), Kiev: ISM NANU, 2001.
Kravchenko, Yu.G. and Savchenko, Yu.V., Calculation of Specific Machining Costs of Turning Operations, in Natsional’nyi gornyi universitet. Sb. nauchn. tr. (National Mining University. Collected Research Papers), Dnipropetrovsk: NGU, 2004, no. 19, vol. 4, pp. 88–91.
Author information
Authors and Affiliations
Additional information
Original Russian Text © Yu.G. Kravchenko, A.A. Semykin, A.Ya. Yaroshik, 2008, published in Sverkhtverdye Materialy, 2008, Vol. 30, No. 5, pp. 59–65.
About this article
Cite this article
Kravchenko, Y.G., Semykin, A.A. & Yaroshik, A.Y. Optimization of machining variables in turning hard cast irons with PCBN-inserted tools. J. Superhard Mater. 30, 333–337 (2008). https://doi.org/10.3103/S1063457608050080
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457608050080