Abstract
A position-sensitive wire-strip detector for thermal and cold neutrons is developed. The neutron converter is a 5-μm layer of 10B. Secondary α-particles are captured in a 1-mm gap of 73%Ar + 25% CO2 + 2% SF6 gas mixture at atmospheric pressure. The gas gain is ensured by an array of 20-μm wires of gold-coated tungsten.
Similar content being viewed by others
References
Aksenov, V.L. and Nikitenko, Yu.V., Kristallogr., 2007, vol. 52, no. 3, p. 564 [Crystallogr. Rep. (Engl. Transl.), 2007, vol. 52, no. 3, p. 374].
Knott, R.B., et al., Nucl. Instrum. Methods A, 1997, vol. 392, p. 62.
Openshaw, R., et al., Preprint TRIUMF, 1988, no. TRI-PP-88-97.
Gavrilov, G, et al., Preprint PNPI, 1999, no. 2328.
Jelen, K., et al., Nucl. Instrum. Methods A, 1997, vol. 392, p. 80.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.S. Litvin, S.I. Potashev, V.I. Razin, R.A. Sadykov, 2011, published in Izvestiya Rossiiskoi Akademii Nauk. Seriya Fizicheskaya, 2011, Vol. 75, No. 2, pp. 247–250.
About this article
Cite this article
Litvin, V.S., Potashev, S.I., Razin, V.I. et al. A position-sensitive wire-strip thermal- and cold-neutron detector with a boron converter. Bull. Russ. Acad. Sci. Phys. 75, 229–231 (2011). https://doi.org/10.3103/S1062873811020213
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1062873811020213