Advertisement

Structural state and phase composition of nickel surface layers modified by high-intensity implantation of titanium ions

  • E. V. Kozlov
  • I. A. Kurzina
  • I. A. Bozhko
  • M. P. Kalashnikov
  • Yu. P. Sharkeev
Article
  • 14 Downloads

Abstract

This paper reports on the results of experimental investigations into the microstructure and the elemental and phase compositions of ion-alloyed nickel surface layers modified by high-intensity implantation of titanium ions. It is established that the implantation of titanium ions into nickel surface layers up to 1600 nm thick leads to the formation of intermetallic phases (namely, NiTi, Ni3Ti, and NiTi2), a solid solution of titanium in nickel, titanium oxides of different stoichiometries, and titanium carbide TiC. It is demonstrated that the phases formed in the ion-alloyed nickel surface layers have a nanocrystalline structure. The average size of the nanocrystal grains is equal to 40 nm.

Keywords

Intermetallic Phasis Titanium Nickelides Microdiffraction Pattern Nickel Sample Nickel Target 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Didenko, A.N., Sharkeev, Yu.P., Kozlov, E.V., and Ryabchikov, A.I., Effekty dal’nodeistviya v ionno-implantirovannykh metallicheskikh materialakh (Long-Range Effects in Ion-Implanted Metallic Materials), Tomsk: Nauchno-Tekhnicheskaya Literatura, 2004 [in Russian].Google Scholar
  2. 2.
    Sharkeev, Yu.P., Ryabchikov, A.I., Kozlov, E.V., et al., Izv. Vyssh. Uchebn. Zaved., Fiz. 2004, vol. 47, no. 9, pp. 44–52 [Russ. Phys. J. (Engl. transl.), 2004), vol. 47, no. 9, pp. 936–945].Google Scholar
  3. 3.
    Bozhko, I.A., Fortuna, S.V., Kurzina, I.A., et al. J. Mater. Sci. Technol. (Shenyang, China), 2004, vol. 20, no. 5, pp. 583–586.Google Scholar
  4. 4.
    Kozlov, E.V., Ryabchikov, A.I., Sharkeev, Yu.P., et al., Surf. Coat. Technol., 2002, vols. 158–159, pp. 343–348.CrossRefGoogle Scholar
  5. 5.
    Kozlov, E.V., Sharkeev, Yu.P., Fortuna, S.V., et al., Poverkhnost, 2003, no. 7, pp. 29–33.Google Scholar
  6. 6.
    Kurzina, I.A., Bozhko, I.A., Kalashnikov, M.P., et al., Metallofiz Noveishie Tekhnol., 2004, vol. 26, no. 12, pp. 1645–1660.Google Scholar

Copyright information

© Allerton Press, Inc. 2007

Authors and Affiliations

  • E. V. Kozlov
    • 1
  • I. A. Kurzina
    • 1
  • I. A. Bozhko
    • 1
  • M. P. Kalashnikov
    • 1
  • Yu. P. Sharkeev
    • 2
  1. 1.Tomsk State University of Architecture and BuildingTomskRussia
  2. 2.Institute of Strength Physics and Materials Science, Siberian DivisionRussian Academy of SciencesTomskRussia

Personalised recommendations