Abstract
(Ti–Al–Mn)/Ti metal–intermetallic layered material was prepared by SHS pressing. It was found that the combustion product obtained in Ti–Al–Mn layer consists of hexagonal Ti(Mn0.755Al1.246) and cubic Ti0.25Al0.67Mn0.08 phases. The transition zone forming between the Ti–Al–Mn layer and the Ti foil was shown to have a thickness of 10–15 µm and to be represented by TixAl phase with variable composition.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386222040057/MediaObjects/12003_2022_5158_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386222040057/MediaObjects/12003_2022_5158_Fig2_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386222040057/MediaObjects/12003_2022_5158_Fig3_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386222040057/MediaObjects/12003_2022_5158_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386222040057/MediaObjects/12003_2022_5158_Fig5_HTML.png)
Similar content being viewed by others
REFERENCES
Titanium and titanium alloys: Fundamentals and applications, Leyens, C. and Peters, M., Eds., Weinheim: Wiley-VCH, 2003. https://doi.org/10.1002/3527602119
Kunal, K., Ramachandran, R., and Norman, M.W., Advances in gamma titanium aluminides and their manufacturing techniques, Prog. Aerosp. Sci., 2012, vol. 55, pp. 1–16. https://doi.org/10.1016/j.paerosci.2012.04.001
Clemens, H. and Mayer, S., Design processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys, Adv. Eng. Mater, 2013, vol. 15, pp. 191–215. https://doi.org/10.1002/adem.201200231
Yogesha, B. and Bhattacharya, S.S., Superplastic behavior of a Ti–Al–Mn alloy, J. Manuf. Sci. Prod., 2008, vol. 9, nos. 1–2, pp. 81–86. https://doi.org/10.1515/IJMSP.2008.9.1-2.81
Mikhaylovskaya, A.V., Mosleh, A.O., Kotov, A.D., Kwame, J.S., Pourcelot, T., Golovin, I.S., and Portnoy, V.K., Superplastic deformation behavior and microstructure evolution of near-α-Ti–Al–Mn alloy, Mater. Sci. Eng. A, 2017, vol. 708, pp. 469–477. https://doi.org/10.1016/j.msea.2017.10.017
Kim, Y.W. and Kim, S.L., Advances in gammalloy materials-processes-application technology: successes, dilemmas, and future, JOM, 2018, vol. 70, pp. 553–560. https://doi.org/10.1007/s11837-018-2747-x
Xu, H., Li, X., Xing, W., Shu, L., Ma, Y., and Liu, K., Processing map and hot working mechanism of as-cast Ti–42Al–5Mn alloy, Adv. Eng. Mater., 2018, vol. 20, p. 1701059. https://doi.org/10.1002/adem.201701059
Kainuma, R., Fujita, Y., Mitsui, H., Ohnuma, I., and Ishida, K., Phase equilibria among α(hcp), β(bcc) and γ(L10) phases in Ti–Al base ternary alloys, Intermetallics, 2000, vol. 8, pp. 855–867. https://doi.org/10.1016/S0966-9795(00)00015-7
Appel, F., Paul, J.D.H., and Oehring, M., Gamma titanium aluminide alloys: science and technology, John Wiley & Sons, 2011. https://doi.org/10.1002/9783527636204
Huang, Z.W. and Bowen, P., Persistent microslip bands in the lamellar TiAl structure subjected to room temperature fatigue, Scr. Mater., 2001, vol. 45, pp. 931–937. https://doi.org/10.1016/S1359-6462(01)01114-9
Wang, Q., Ding, H., Zhang, H., Chen, R., Guo, J., and Fu, H., Influence of Mn addition on the microstructure and mechanical properties of a directionally solidified γ-TiAl alloy, Mater. Charact., 2018, vol. 137, pp. 133–141. https://doi.org/10.1016/j.matchar.2018.01.029
Hashimoto, K., Doi, H., Kasahara, K., Nakano, O., Tsujimoto, T., and Suzuki, T., Effects of third elements on the structures of TiA1-based alloys, J. Japan Inst. Met., 1988, vol. 52, no. 8, pp. 816–825. https://doi.org/10.2320/jinstmet1952.52.8_816
Chen, Z., Jones, I., and Small, C., Laves phase in Ti–42Al–10Mn alloy, Scr. Mater., 1996, vol. 35, no. 1, pp. 23–27. https://doi.org/10.1016/1359-6462(96)00085-1
Matts, O.E., Tarasov, S.Yu, Domenichini, B., Lazurenko, D.V., Filippov, A.V., Bataeva, V.A, Rashkovets, M.V., Chakin, I.K., and Emurlaeva, K.I., Tribo-oxidation of Ti–Al–Fe and Ti–Al–Mn cladding layers obtained by non-vacuum electron beam treatment, Surf. Coat. Tech., 2021, vol. 421, p. 127442. https://doi.org/10.1016/j.surfcoat.2021.127442
Butler, C.J., Mccartney, D.G., Small, C.J., Horrocks, F.J., and Saunders, N., Solidification microstructures and calculated phase equilibria in the Ti–Al–Mn system, Acta Mater., 1997, vol. 45, no 7, pp. 2931–2947. https://doi.org/10.1016/S1359-6454(96)00391-6
Yan, X.-L., Chen, X.-Q., Grytsiv, A., Rogl, P., Podloucky, R., Schmidt, H., Giester, G., and Ding, X.-Y., On the ternary Laves phases Ti(Mn1–xAlx)2 with MgZn2-type, Intermetallics, 2008, vol. 16, pp. 16–26. https://doi.org/10.1016/j.intermet.2007.07.005
Lawerens, W., De Boeck, A., Thijs, M., Van Stappen, M., and Steenackers, P., PVD Al–Ti and Al–Mn coatings for high temperature corrosion protection of sheet steel, Surf. Coat. Tech., 2001, vols. 146–147, pp. 27–32. https://doi.org/10.1016/S0257-8972(01)01468-2
Pityulin, A.N., Samorasprostranyayushchiisya visokotemperaturnyi sintez: teoriya i praktika (Self-propagating high-temperature synthesis: theory and practice), Sytschev, A.E., Ed., Chernogolovka: Territoriya, 2001, pp. 333–353.
Shcherbakov, V.A., Gryadunov, A.N., and Alymov, M.I., Synthesis and characteristics of the B4C–ZrB2 composites, Lett. Mater., 2017, vol. 7, pp. 398–401. https://doi.org/10.22226/2410-3535-2017-4-398-401
Sytschev, A.E., Busurina, M.L., and Lazarev, P.A., Combustion synthesis and phase formation in the Ti–Al–Mn alloy, Int. J. Self-Propag. High-Temp. Synth., 2022, vol. 31, no. 2, pp. 80–84. https://doi.org/10.3103/S1061386222020108
Tripathi, A., Kulkarrni, A., and Kulkarni, K.N., Interdiffusion in β (BCC) phase of the Ti–Al–Mn system at 1100°C, Metall. Mater. Trans., 2020, vol. 51A, pp. 1789–1798. https://doi.org/10.1007/s11661-020-05629-z
Huang, X., Tan, J., Guo, Y., Xu, G., and Cui, Y., Experimental diffusion research on BCC Ti–Mn binary and Ti–Al–Mn ternary alloys, J. Phase Equilib. Diffus, 2018, vol. 39, pp. 702–713. DOI. https://doi.org/10.1007/s11669-018-0675-7
Watson, A., Al–Mn–Ti (Aluminium–Manganese–Titanium), Light metal systems, Berlin: Springer, 2005, part 3, pp. 253–265.
Lyakishev, N.P., Diagrammy sostoyaniya dvoinykh metallicheskikh sistem (State diagram for double metallic systems), Moscow: Mashinostroenie, 1996, vol. 3.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by O. Golosova
About this article
Cite this article
Lazarev, P.A., Busurina, M.L., Gryadunov, A.N. et al. SHS Pressing of (Ti–Al–Mn)/Ti Metal–Intermetallic Layered Material. Int. J Self-Propag. High-Temp. Synth. 31, 164–168 (2022). https://doi.org/10.3103/S1061386222040057
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1061386222040057