![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386220010033/MediaObjects/12003_2020_5039_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386220010033/MediaObjects/12003_2020_5039_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386220010033/MediaObjects/12003_2020_5039_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1061386220010033/MediaObjects/12003_2020_5039_Fig4_HTML.gif)
REFERENCES
Vafai, K., Handbook of Porous Media, New York: Taylor and Francis, 2015, pp. 128–141.
Sytschev, A.E., Vrel, D., Boyarchenko, O.D., Khrenov, D.S., Sachkova, N.V., and Kovalev, I.D., SHS joining by thermal explosion in (Ni + Al)/Nb/(Ni + Al + Nb) sandwiches: Microstructure of transition zone, Int. J. Self-Propag. High-Temp. Synth., 2017, vol. 26, no. 1, pp. 49–53. https://doi.org/10.3103/S1061386217010137
Sytschev, A.E., Vrel, D., Boyarchenko, O.D., Roshchupkin, D.V., and Sachkova, N.V., Combustion synthesis in bi-layered (Ti–Al)/(Ni–Al) system, J. Mater. Process. Technol., 2017, vol. 240, pp. 60–67. https://doi.org/10.1016/j.jmatprotec.2016.09.010
Shchukin, A.S. and Sytschev, A.E., Fine structure of transition layer formed between NiAl melt and W substrate during self-propagating high-temperature synthesis, Lett. Mater., 2017, vol. 3, pp. 244–248. https://doi.org/10.22226/2410-3535-2017-3-244-248
Latukhin, E.I., Amosov, A.P., Borisov, D.V., Ryabov, A.M., and Illarionov, A.Yu., The interaction of the porous MAX-phase of carbosilicide titanates with nickel melt in the conditions of the SHS process, Bull. Samara State Tech. Univ. Ser. Tech. Sci., 2017, no. 1, pp. 143–151.
Amosov, A.P., Latukhin, E.I., Ryabov, A.M., Umerov, E.R., and Novikov, V.A., The application of the SHS process for the manufacture of copper–titanium silicon carbide composite (Cu–Ti3SiC2), IOP Conf. Ser., 2018, vol. 1115. https://doi.org/10.1088/1742-6596/1115/4/042003
Amosov, A., Luts, A.R., Latukhin, E.I., Rubakov, A.D., Novikov, V.A., and Shipilov, S.I. Effect of alloying on structure and properties of particle – reinforced aluminum matrix composites Al/TiC produced by SHS in aluminum melt, IOP Conf. Ser.: J. Phys., 2018, vol. 1115. https://doi.org/10.1088/1742-6596/1115/4/042002
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Gabbasov, R.M., Shulpekov, A.M. & Kitler, V.D. Capillary Spreading of Copper Melt over SHS-Produced NiAl. Int. J Self-Propag. High-Temp. Synth. 29, 52–54 (2020). https://doi.org/10.3103/S1061386220010033
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1061386220010033