Abstract
Explored was the deposition of multilayer TiC x –Ti x Si y -based coatings onto Ti substrate by SHS method. Sandwich-type green multilayer structures were assembled from Ti foils and Ti + 0.5C, Ti + Si, 5Ti + 3Si, and Ti + 0.65C pellets and ignited under 1 atm of Ar and a load (400 g). Burned sandwiches were characterized by SEM, EDS, and XRD. In all cases, we observed good metal–ceramic joining. Prerequisites for such a joining are (i) the presence of the liquid phase in combustion products, (ii) good metal–ceramic wettability, and (iii) closeness of reaction temperature to the melting point of substrate.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Mayrhofer, P.H., Mitterer, C., Hultman, L., and Clemens, H., Microstructural design of hard coatings, Prog. Mater. Sci., 2006, vol. 51, no. 8, pp. 1032–1114.
Erkens, G., New approaches to plasma enhanced sputtering of advanced hard coatings, Surf. Coat. Technol., 2007, vol. 201, nos. 9–11, pp. 4806–4812. doi 10.1016/j.surfcoat.2006.07.022
Xiong, H.P., Mao, W., Xie, Y.-H., Cheng, Y.-Y., and Li, X.-H., Formation of silicide coatings on the surface of a TiAl-based alloy and improvement in oxidation resistance, Mater. Sci. Eng. A, 2005, vol. 391, nos. 1–2, pp. 10–18. doi 10.1016/j.msea.2004.05.026
Chen, S., Meng, Q., Zhang, N., Cue, P., and Munir, Z.A., In situ synthesis and bonding of Ti–TiAl–TiC/Ni functionally graded materials by field-activated pressure-assisted synthesis process, Mater. Sci. Eng. A, 2012, vol. 538, no. 1, pp. 103–109. doi 10.1016/j.msea. 2012.01.020
Tian, W.-B., Kita, H., Hyuga, H., and Kondo, N., Joining of SiC by Al infiltrated TiC tape: Effect of joining parameters on the microstructure and mechanical properties, J. Eur. Ceram. Soc., 2012, vol. 32, no. 2, pp. 149–156. doi 10.1016/j.jeurceramsoc.2011.08.001
Abbasi-Khazaei, B., Jahanbakhsh, A., and Bakhtiari, R., TLP bonding of dissimilar FSX-414/IN-738 system with MBF-80 interlayer: The effect of homogenizing treatment on microstructure and mechanical properties, Mater. Sci. Eng. A, 2016, vol. 651, no. 1, pp. 93–101. doi 10.1016/j.msea.2015.10.087
Sytschev, A.E., Vadchenko, S.G., Kamynina, O.K., and Sachkova, N.V., Simultaneous synthesis and joining of a Ni–Al-based layer to a Mo foil by SHS, Int. J. Self-Propag. High-Temp. Synth., 2009, vol. 18, no. 3, pp. 213–216. doi 10.3103/S1061386209030133
Sytschev, A.E., Vadchenko, S.G., Boyarchenko, O.D., Vrel, D., Sachkova, N.V., SHS joining of intermetallics with metallic substrates, Int. J. Self-Propag. High-Temp. Synth., 2011, vol. 20, no. 3, pp. 185–190. doi 10.3103/S1061386211030149
Vadchenko, S.G., Boyarchenko, O.D., Sytschev, A.E., and Sachkova, N.V., SHS joining in the Ti–Si–C system: Structure of transition layer, Int. J. Self-Propag. High-Temp. Synth., 2013, vol. 22, no. 1, pp. 46–51. doi 10.3103/S1061386213010135
Kamynina, O.K., Vadchenko, S.G., Shchukin, A.S., Kovalev, I.D., and Sytschev, A.E., SHS joining in the Ti–C–Si system, Int. J. Self-Propag. High-Temp. Synth., 2016, vol. 25, no. 1, pp. 62–65. doi 10.3103/S1061386216010064
Shirzadi, A.A., Zhub, Y., and Bhadeshia, H.K.D.H., Joining ceramics to metals using metallic foam, Mater. Sci. Eng. A, 2008, vol. 496, no. 3, pp. 501–506. doi 10.1016/j.msea.2008.06.007
Nogi, K., The role of wettability in metal–ceramic joining, Scr. Mater., 2010, vol. 62, no. 12, pp. 945–948. doi 10.1016/j.scriptamat.2010.03.007.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Kamynina, O.K., Vadchenko, S.G., Shchukin, A.S. et al. Multilayer coatings on Ti substrate by SHS method. Int. J Self-Propag. High-Temp. Synth. 25, 238–242 (2016). https://doi.org/10.3103/S106138621604004X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S106138621604004X