Skip to main content
Log in

Centralized Restoration of Parts at the Enterprises of the Soyuzselkhoztekhnika and Goskomselkhoztekhnika Systems

  • RELIABILITY, STRENGTH, AND WEAR RESISTANCE OF MACHINES AND STRUCTURES
  • Published:
Journal of Machinery Manufacture and Reliability Aims and scope Submit manuscript

Abstract

Our country has been undergoing processes related to the reorganization and improvement of agricultural production services. The Soyuzselkhotechnika system was organized to replace the machine-technological stations. The development dynamics of Soyuzselkhotekhnika shows the volumes of marketable products, and it is particularly noted that the markup on all services used to be only 12.6%, and now it has risen to 45%. The volumes of reconditioning of parts at the enterprises of Soyuzselkhotekhnika are given; more than 60% of the names of parts were restored. Achievements of individual enterprises in the implementation of efficient technologies are shown. It is confirmed that the reconditioning of worn parts at the enterprises of Soyuzselkhotekhnika annually saved for the country up to 12% of new spare parts, over 500 000 tons of casting, and 150 000 tons of rolled products. The role of sectoral science and academic science is shown. The created system of Soyuzselkhotekhnika enterprises was an effective assistant for commodity producers not only in providing new machines and assemblies, but also for remanufactured parts with high quality, low price, and guaranteed performance.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.

Similar content being viewed by others

REFERENCES

  1. Ezhevskii, A.A., Fedorenko, V.F., and Aronov, E.L., Strategiya, effektivnost’ i opyt proizvodstvenno-tekhnicheskogo obespecheniya sel’skogo khozyaistva vo vtoroi polovine XX veka (sistema Soyuzsel’khoztekhnika–Goskomsel’khoztekhnika) (Strategy, Efficiency, and Experience of Production-Technical Provision of Agriculture in the Second Half of the 20th Century (the Soyuzsel’khoztekhnika–Goskomsel’khoztekhnika System)), Moscow: Rosinformagrotekh, 2004.

  2. Ogorodnik, I.A. and Grechikhin, D.S., Istoriya i etapy razvitiya remontnogo proizvodstva v sel’skom khozyaistve (History and Stages of Development of Repair Production in Agriculture), Minsk: Medisont, 2018.

  3. Chernoivanov, V.I. and Lyalyakin, V.P., Organizatsiya i tekhnologiya vosstanovleniya detalei mashin (Organization and Technology of Restoration of Machine Elements), Moscow: GOSNITI, 2003, 2nd ed.

  4. Chernoivanov, V.I., Lyalyakin, V.P., and Golubev, I.G., Organizatsiya i tekhnologiya vosstanovleniya detalei mashin (Organization and Technology of Restoration of Machine Elements), Moscow: Rosinformagrotekh, 2016.

  5. Apatenko, A.S., Bykov, V.V., Golubev, I.G., et al., Tekhnologiya i organizatsiya vosstanovleniya detalei i sborochnykh edinits pri servisnom soprovozhdenii (Technolg and Organization of Restoration of Machine Elements and Assembly Units at Service Maintenance), Moscow: Rosinformagrotekh, 2017, vol. 1.

  6. Apatenko, A.S., Bykov, V.V., Golubev, I.G., et al., Tekhnologiya i organizatsiya vosstanovleniya detalei i sborochnykh edinits pri servisnom soprovozhdenii (Technology and Organization of Restoration of Machine Elements and Assembly Units at Service Maintenance), Moscow: Rosinformagrotekh, 2018, vol. 2.

  7. Ulez’ko, A.V. and Katelikov, A.N., Mashinno-tekhnologicheskie stantsii integrirovannykh struktur APK. Formirovanie, ispol’zovanie, informatsionnoe obespechenie protsessov planirovaniya (Farm Machinery Depots of Integrated Agroengineering Structures: Formation, Usage, and Information Support of Planning Processes), Voronezh: Istoki, 2010.

  8. Kushnarev, L.I., Problems of development of farm machinery depots, Vestn. Moskovskii Gos. Agroinzhenernyi Univ. V.P. Goryachkina, 2010, no. 6, pp. 7–9.

  9. Chernoivanov, V.I. and Golubev, I.G., Vosstanovlenie detalei mashin (sostoyanie i perspektivy) (Restoration of Machine Elements: State-of-the-Art and Prospects), Moscow: Rosinformagrotekh, 2010.

  10. Lyalyakin, V.P., Restoration of machine elements is an important direction of studies at GOSNITI, Tr. GOSNITI, 2013, vol. 113, pp. 233–244.

    Google Scholar 

  11. Chernoivanov, V.I., Main stages of development of GOSNITI, Tr. GOSNITI, 2013, vol. 113, pp. 4–13.

    Google Scholar 

  12. Korneev, V.M., Novikov, V.S., Kravchenko, I.N., et al., Tekhnologiya remonta mashin (Technology of Machine Repair), Moscow: Infra-M, 2018.

  13. Golubev, I.G. and Taratorkin, V.M., Tekhnologicheskie protsessy remontnogo proizvodstva (Technological Processes of Repairing), Moscow: Akademiya, 2019, 3rd ed.

Download references

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to V. P. Lyalyakin or I. N. Kravchenko.

Ethics declarations

The authors declare that they have no conflicts of interest.

Additional information

Translated by V. Selikhanovich

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lyalyakin, V., Kravchenko, I. & Korneev, V. Centralized Restoration of Parts at the Enterprises of the Soyuzselkhoztekhnika and Goskomselkhoztekhnika Systems. J. Mach. Manuf. Reliab. 52, 468–473 (2023). https://doi.org/10.3103/S1052618823050126

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1052618823050126

Keywords:

Navigation