Abstract
Structural metallographic studies of the VZh178P Ni-based superalloy after rotation friction welding performed using the PSTI-400 unique Russian-made setup are presented. The effect of individual welding parameters and their combinations are studied on the microstructure of welded joints of the heat-affected zone and the main material and Vickers microhardness in these areas. After preparing, welding, and cutting, the samples were heat-treated and the results were presented.
Similar content being viewed by others
REFERENCES
Taysom, B.S., Sorensen, C.D., and Nelson, T.W., Strength in rotary friction welding of five dissimilar nickel-based superalloys, Weld. Res., 2021, vol. 100, pp. 302-s–308-s. https://doi.org/10.29391/2021.100.027
Eliseev, Yu.S., Maslenkov, S.B., Geikin, V.A., and Poklad, V.A., Tekhnologiya sozdaniya neraz”emnykh soedinenii pri proizvodstve gazoturbinnykh dvigatelei (Technology for Creating Permanent Joints at Production of Gas-Turbine Engines), Moscow: Nauka i Tekhnologii, 2001.
Sorokin, L.I., Weldability of nickel superalloys (review). Part 2, Svarochnoe Proizvod., 2004, no. 9, pp. 3–7.
Sorokin, L.I., Generation of hot cracks at welding of nickel superalloys, Svarochnoe Proizvod., 2005, no. 7, pp. 29–33.
Kablov, E.N., Lomberg, B.S., and Ospennikova, O.G., Creation of modern heat-resistant materials and technologies of their fabrication for aviation engine manufacture, Kryl’ya Rodiny, 2012, nos. 3–4, pp. 34–38.
Lomberg, B.S., Ovsepyan, S.V., Bakradze, M.M., and Mazalov, I.S., High-temperature Ni-base alloys for GTE components, Aviats. Mater. Tekhnol., 2012, no. S, pp. 52–57.
Egorova, O.V., Kurbatov, A.S., Rabinskiy, L.N., and Zhavoronok, S.I., Modeling of the dynamics of plane functionally gradded waveguides based on the different formulations of the plate theory of I.N. Vekua type, Mech. Adv. Mater. Struct., 2019, vol. 28, no. 5, pp. 506–515. https://doi.org/10.1080/15376494.2019.1578008
Lurie, S., Rabinskiy, L.N., Kriven, G.I., and Makovskii, S.V., Effective dissipative properties of a whiskered layer in modified fibrous composites with whiskered fibres, Periodico Tche Quimica, 2020, vol. 17, no. 36, pp. 978–993.
Babaytsev, A.V., Prokofiev, M.V., and Rabinskiy, L.N., Mechanical properties and microstructure of stainless steel manufactured by selective laser sintering, Nanosci. Technol.: Int. J., 2017, vol. 8, no. 4, pp. 359–366. https://doi.org/10.1615/NanoSciTechnolIntJ.v8.i4.60
Huang, Z.W., Li, H.Y., Preuss, M., Karadge, M., Bowen, P., Bray, S., and Baxter, G., Inertia friction welding dissimilar nickel-based superalloys alloy 720Li to IN718, Metall. Mater. Trans. A, 2007, vol. 38, pp. 1608–1620. https://doi.org/10.1007/s11661-007-9194-6
Bychkov, V.M., Selivanov, A.S., Medvedev, A.Yu., Supov, V.A., Bol’shakov, B.O., Grin’, R.R., and Musin, F.F., Study of weldability of nickel-base superalloy Ni–2Nb–3Al–3Ti–5Mo–14Cr by linear friction welding, Vestn. Ufimsk. Gos. Aviats. Tekh. Univ., 2012, vol. 16, no. 7, pp. 112–116.
Sukhorukov, R.Yu., Simulation of technology for the production of axisymmetric parts for gas turbine engines made of heat resistant alloys by means of reeling under superplastic conditions, J. Mach. Manuf. Reliab., 2020, vol. 49, no. 2, pp. 150–158. https://doi.org/10.3103/S1052618820020132
Babaitsev, A.V., Burtsev, A.Yu., Rabinskii, L.N., and Solyaev, Yu.O., Method for approximate estimation of stresses in a thick-walled axisymmetric composite structure, Tr. Mosk. Aviats. Inst., 2019, no. 107, p. 4.
ACKNOWLEDGMENTS
The authors are grateful to S.P. Pavlinich, director of the branch of JSC UEC “NIID”; E.A. Kudryavtsev, head of the laboratory “Electron Beam Welding” of the branch of AO “ODK” “NIID”; and L.N. Rabinskii, head of the Directorate of Institute no. 9 MAI (NRU).
Funding
This work was supported by a grant of the President of the Russian Federation, project no. MK-398.2022.4.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by N. Saetova
About this article
Cite this article
Fozilov, T.T., Yakovlev, M.G. & Babaytsev, A.V. The Effect of Thermal Treatment on Weld Structure of the VZh178P Alloy after Rotational Friction Welding. J. Mach. Manuf. Reliab. 52, 236–240 (2023). https://doi.org/10.3103/S1052618823030044
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618823030044