Abstract
The robotic machine implementing the additive manufacturing of induction coils has been developed to typify and automate the manufacturing process of induction coils being a finished functional element of the antenna equipment. This manufacturing equipment makes it possible to mass-produce the high-power integral induction coils with a high repeatability of electrodynamic characteristics.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1052618822080143/MediaObjects/12001_2022_8409_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1052618822080143/MediaObjects/12001_2022_8409_Fig2_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1052618822080143/MediaObjects/12001_2022_8409_Fig3_HTML.png)
Similar content being viewed by others
REFERENCES
Fedosov, D.V., Kolesnikov, A.V., and Nikolaev, A.V., Advanced MF antennas for underground communications, J. Phys.: Conf. Ser., 2021, vol. 1862, p. 012002. https://doi.org/10.1088/1742-6596/1862/1/012002
Hansen, R.C., Electrically Small, Superdirective, and Superconducting Antennas, Hoboken, N.J.: John Wiley & Sons, 2006. https://doi.org/10.1002/0470041048
Fedosov, D.V., Kolesnikov, A.V., and Nikolaev, A.V., RF Patent no. 2680674, 2019.
Kheifetz, M.L., Design of mechatronic engineering systemsin digitalized traditional and additive manufacturing, J. Adv. Mater. Technol., 2021, vol. 6, no. 1, pp. 18–29. https://doi.org/10.17277/jamt.2021.01.pp.018-029
Huang, J., Chen, Q., Jiang, H., Zou, B., Li, L., Liu, J., and Yu, H., A survey of design methods for material extrusion polymer 3D printing, Virtual Phys. Prototyping, 2020, vol. 15, no. 2, pp. 148–162. https://doi.org/10.1080/17452759.2019.1708027
Arkhanova, N.N., Guzei, D.N., Kovaleva, A.V., Kondrasheva, Yu.A., and Chuprova, E.E., Exploring and looking at large-scale additive manufacturing of materials during Industry 4.0, Ekon. Predprinimatel’stvo, 2021, no. 4, pp. 1047–1050. https://doi.org/10.34925/EIP.2021.129.4.204
Ivanova, O.V., Korotkova, L.N., Fattakhov, M.M., and Khalikov, R.M., Reliable quality management of electrical equipment functioning in 3D additive technologies, Elektrotekh. Inf. Kompleksy Sist., 2020, vol. 16, no. 3, pp. 43–49. https://doi.org/10.17122/1999-5458-2020-16-3-43-49
Armashova-Tel’nik, G.S., Sokolova, P.N., and Degterev, D.V., Additive technologies: An innovative effect of digitalization in industry, Vestn. Voronezhskogo Gos. Univ. Inzh. Tekhnol., 2020, vol. 82, no. 4, pp. 347–353. https://doi.org/10.20914/2310-1202-2020-4-347-353
Gibson, I., Rosen, D.W., and Stucker, B., Additive Manufacturing Technologies, New York: Springer, 2010. https://doi.org/10.1007/978-1-4419-1120-9
Fedosov, D.V., Kolesnikov, A.V., Shevelev, O.V., and Dmitriev, P.V., RF Patent no. 2758986, 2021.
Rauwendaal, C., Polymer Extrusion, Munich : Hanser, 2014, 5th ed.
Mount, E.M., III, Extrusion processes, Applied Plastics Engineering Handbook: Processing, Materials, and Applications, 2017, pp. 217–264. https://doi.org/10.1016/B978-0-323-39040-8.00012-2
Tugov, I.I. and Kostrykina, G.I., Khimiya i fizika polimerov (Chemistry and Physics of Polymers), Moscow: Khimiya, 1989.
Bogoroditskii, N.N., Pasynkov, V.V., and Tareev, B.M., Elektrotekhnicheskie materialy (Electrical Engineering Materials), Leningrad: Energoatomizdat, Leningrad. Otd., 1985, 7th ed.
Funding
This work was supported by the Mechanical Engineering Research Institute of the Russian Academy of Sciences, and was carried out under operation of the Innovation Promotion Fund (Contract no. 254GS1TsTS10-D5/65699 dated March 12, 2021).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interests.
Additional information
Translated by E. Maslennikova
About this article
Cite this article
Nikolaev, A.V., Fedosov, D.V., Shevelyov, O.V. et al. Additive Manufacturing of Induction Coils for Antennas of Advanced Radio Systems. J. Mach. Manuf. Reliab. 51, 820–824 (2022). https://doi.org/10.3103/S1052618822080143
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618822080143