Abstract
In this work we consider models for estimating the roughness of machine parts with wear-resistant surfaces during turning. A model for estimating roughness was proposed that allows establishing the relationship among the value of surface roughness of a gas-thermal coating obtained during turning with cutting conditions, the geometric parameters of the cutter, and the properties of the materials of the workpiece and the tool.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1052618822050089/MediaObjects/12001_2022_8372_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1052618822050089/MediaObjects/12001_2022_8372_Fig2_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1052618822050089/MediaObjects/12001_2022_8372_Fig3_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1052618822050089/MediaObjects/12001_2022_8372_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1052618822050089/MediaObjects/12001_2022_8372_Fig5_HTML.png)
Similar content being viewed by others
REFERENCES
Kovalev, A.A. and Krasko, A.S., Prospects for reducing the complexity of manufacturing machines through the use of functional coatings, Mekhanika i mashinostroenie. Nauka i praktika (Mechanics and Machinery Manufacture: Science and Practice), St. Petersburg: Zhukova E.V., 2020, pp. 27–30. https://doi.org/10.26160/2658-6185-2020-3-27-30
Kovalev, A.A. and Krasko, A.S., Prospects and problems of the application of supersonic plasma spraying in the conditions of small-batch production, Sovremennye materialy, tekhnika i tekhnologiya (Modern Materials, Technics, and Technology), Kursk: Yugo-Zapadnyi Gos. Univ., 2020, pp. 174–177. https://doi.org/10.47581/2020/30.12.2020/MTO54.1.043
Tokarev, D.I., Drozdov, A.A., Gulyaev, M.N., Sirotenko, L.D., Muratov, K.R., Ablyaz, T.R., and Islamov, V.F., Surface roughness in the machining of F-4K20 composite, Russ. Eng. Res., 2019, vol. 39, no. 2, pp. 167–170. https://doi.org/10.3103/S1068798X19020126
Selvaraj, D., Optimization of surface roughness of duplex stainless steel in dry turning operation using taguchi technique, Mater. Phys. Mech., 2018, vol. 40, no. 1, pp. 63–80. https://doi.org/10.18720/MPM.4012018_8
Alajmi, M.S. and Almeshal, A.M., Prediction and optimization of surface roughness in a turning process using the anfis-qpso method, Materials, 2020, vol. 13, no. 13, p. 2986. https://doi.org/10.3390/ma13132986
Nabil, K., Zahia, H., Yalles, M.A., and Ouelaa, N., Statistical analysis of surface roughness by design of experiments in hard turning, Mechanika, 2012, vol. 18, no. 5, pp. 605–611. https://doi.org/10.5755/j01.mech.18.5.2704
Albagachiev, A.Yu., Kovalev, A.A., and Krasko, A.S., Selection of the method of hardening treatment of machine elements under conditions of automated small-scale production, Probl. Mashinostr. Avtom., 2021, no. 2, pp. 4–12. https://doi.org/10.52261/02346206_2021_2_4
Makarov, R.V. and Oskolkova, E.R., Impact of vibrations on surface roughness at turning with coolants, Vestn. Irkutskogo Gos. Tekh. Univ., 2006, no. 4-3, pp. 76–79.
Rotarenko, O.Yu. and Lyubomudrov, S.A., Studying the dependence of the surface roughness on the cutting speed at turning of titanium alloys, Nedelya Nauki SPbGPU (materialy nauchno-prakticheskoi konferentsii) (Week of Science of Peter the Great St. Petersburg Polytechnic University (Materials of the Sci.-Pract. Conf.)), 2014, pp. 228–230.
Nekrasov, V.N., Cherdantsev, A.O., and Cherdantsev, P.O., Studying the process of formation of the roughness of the processed surface at turning, Polzunovskii Vestn., 2016, no. 3, pp. 71–75
Zhukov, E.L., Larionova, T.A., and Plavnik, S.L., Methods for providing the prescribed roughness of the treated surface at operations of fine turning, Sovrem. Mashinostr. Nauka Obraz., 2016, no. 5, pp. 924–935. https://doi.org/10.1872/MMF-2016-84
Yaroslavtsev, V.M., Obrabotka gazotermicheskikh pokrytii rezaniem. Uchebnoe posobie dlya vuzov (Cutting of Gas-Thermal Coatings: Textbook for Universities), Moscow: Izd-vo Mosk. Gos. Tekh. Univ. im. N. E. Baumana, 2013.
Saklakova, A.E., Selina, Yu.N., Simakov, M.A., and Filippov, Yu.A., Experimental study of detail surface roughness of heat-resistant steel after turning by cutting inserts made of sintered carbide, Reshetnevskie Chteniya, 2016, vol. 1, pp. 577–579.
Sergeev, A.S., Plotnikov, A.L., and Zaitseva, N.G., The refined mathematical model of calculation of parameter of a surface roughness at turning carbon steels at the CNC machine, Metalloobrabotka, 2012, nos. 5–6, pp. 64–68.
Vozhzhov, A.A., Evaluation of the influence of the relative differences of the detail and the tool on the ribbon of the surface in the process of the shaped point of the ribbons of the ring of the manifolds, Vestn. Sovrem. Tekhnol., 2017, no. 3, pp. 24–30.
Rogov, V.A. and Gorbani, S., Investigation of the machining parameters for the finish turning, Fundam. Issled., 2013, no. 11-3, pp. 435–440.
Chigirinskii, Yu.L., Ingemansson, A.R., Yudkin, A.Yu., and Golovkov, V.V., Analysis of the influence of turning technological conditions on the white height of the treated surface, Izv. Volgograd. Gos. Tekh. Univ., 2019, no. 1, pp. 44–47.
Suslov, A.G. and Gorlenko, O.A., Eksperimental’no-statisticheskii metod obespecheniya kachestva poverkhnosti detalei mashin (Experimental-Statistical Method for Quality Assurance of Machine Element Surface), Moscow: Mashinostroenie, 2003.
Suslov, A.G., Kachestvo poverkhnostnogo sloya detalei mashin (Quality of Surface Layer of Machine Elements), Moscow: Mashinostroenie, 2000.
Suslov, A.G. and Dal’skii, A.M., Nauchnye osnovy tekhnologii mashinostroeniya (Scientific Foundations of Machinery Manufacture Technology), Moscow: Mashinostroenie, 2002.
Spravochnik tekhnologa-mashinostroitelya (Reference Book of Mechanical Technology Engineer), Vasil’ev, A.S. and Kutin, A.A., Eds., Moscow: Innovatsionnoe Mashinostroenie, 2018, vol. 2.
Vorontsov, A.L., Albagachiev, A.Yu., Sultan-zade, N.M., Teoreticheskie osnovy obrabotki metallov v mashinostroenii (Theoretical Foundations of Metal Treatment in Machinery Manufacture), Staryi Oskol, Belgorod oblast: TNT, 2014.
Bez”yazychnyi, V.F., Osnovy tekhnologii mashinostroeniya. Uchebnik dlya vuzov (Foundations of Machinery Manufacture Technology: Textbook for Universities), Moscow: Mashinostroenie, 2013.
Aslantas, K., Danish, M., Hasçelik, A., Mia, M., Gupta, M., Ginta, T., and Ijaz, H., Investigations on surface roughness and tool wear characteristics in micro-turning of Ti–6Al–4V alloy, Materials, 2020, vol. 13, no. 13, p. 2998. https://doi.org/10.3390/ma13132998
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by K. Gumerov
About this article
Cite this article
Kovalev, A.A., Krasko, A.S. & Rogov, N.V. Evaluation of the Surface Roughness of Machine Parts with Wear-Resistant Gas Thermal Coatings during Turning. J. Mach. Manuf. Reliab. 51, 540–547 (2022). https://doi.org/10.3103/S1052618822050089
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618822050089