Abstract—
This article considers the manufacturing technology of lattice aircraft structures with braided reinforcement.
Similar content being viewed by others
REFERENCES
Ayranci, C. and Carey, J.P., Predicting the longitudinal elastic modulus of braided tubular composites using a curved unit-cell geometry, Composites, Part B, 2010, vol. 41, p. 229.
Barynin, V.A., Bunakov, V.A., Razin, A.F., and Vasiliev, V.V., Aerospace composite lattice structures, in Proceedings of the Conference on Composite Materials, Paris, France, 1999.
Branscomb, D., Beale, D., and Broughton, R., New directions in braiding, J. Eng. Fibers Fabr., 2013, vol. 8, no. 2, p. 11.
Tsai, K.H., Hwan, C.L., Chen, W.L., and Chiu, C.H., A parallelogram spring model for predicting the effective elastic properties of 2D braided composites, Compos. Struct., 2008, vol. 83, p. 273.
Wang, Y. and Zhao, D., Effect of fabric structures on the mechanical properties of 3-D textile composites, J. Ind. Textiles, 2006, vol. 35, p. 239.
Wu, L., Zhang, F., Sun, B., and Gu, B., Finite element analyses on three-point low-cyclic bending fatigue of 3-D braided composite materials at microstructure level, Int. J. Mech. Sci., 2014, vol. 84, p. 41.
Wu, L. and Gu, B., Fatigue behaviors of four-step three-dimensional braided composite material: a meso-scale approach computation, Textile Res. J., 2014, vol. 84, p. 1915.
Vasil’ev, V.V. and Bunakov, V.A., Design of mesh axial composite cylindrical shells, Konstrukts. Kompoz. Mater., 2000, no. 2, p. 68.
Vasil’ev, V.V., Barynin, V.A., Razin, A.F., Petrokovskii, S.A., and Khalimanovich, V.I., Anisogrid composite mesh structures—development and application to space technology, Kompoz. Nanostrukt., 2009, no. 3, p. 38.
Ocharenko, Yu.V., Razrabotka metoda i algoritma korrektsii formy otrazhayushchei poverkhnosti transformiruemogo zontichnogo reflektora (Development of a Method and Algorithm for Correcting the Shape of the Reflecting Surface of a Transformable Umbrella Reflector), Tomks: Tomsk. Gos. Univ., 2016, p. 44.
Samipour, S.A. and Khaliulin, V.I., Batrakov, V.V., Development of the technology of manufacturing aerospace composite tubular elements by radial weaving, J. Mach. Manuf. Reliab., 2018, vol. 47, no. 3, p. 284.
Samipour, S.A., Khaliulin, V.I., and Batrakov, V.V., A method for calculating the parameters for manufacturing preforms via radial braiding, J. Mach. Manuf. Reliab., 2017, vol. 46, no. 3, p. 302.
Samipur, S.A. and Danilov, Y.S., Development and verification of an analytic technique to determine the stiffness parameters of braided tubular parts, Russ. Aeronaut., 2016, vol. 59, no. 4, p. 460.
Samipour, S.A., Batrakov, V.V., and Khaliulin, V.I., Calculation and experimental methodic for ensuringthe accuracy of the reinforcement angle of the preform made by radial braiding, Russ. Eng. Res., 2018, vol. 38, no. 11, p. 855.
Yee, J.C.H. and Pellegrino, S., Composite tube hinges, J. Aerospace Eng., 2005, vol. 18, no. 4, p. 224.
Pellegrino, S., Satellite hardware: Stow and go for space travel, Adv. Mater. Process., 2012, vol. 170, p. 39.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by O. Pismenov
About this article
Cite this article
Samipour, S.A., Khaliulin, V.I. & Batrakov, V.V. Manufacturing Technology of Braided Lattice Aircraft Structures. J. Mach. Manuf. Reliab. 49, 787–795 (2020). https://doi.org/10.3103/S1052618820090101
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618820090101