Abstract
A method for determination of the mass, of the coordinates of the center of mass, and of the tensor of body inertia was developed. The peculiarity of this method is that we have set for the body under study the rotation and finite fixed linear and angular displacements. The response of the dynamic system of the measuring bench to the changes in the location of the masses of the body and of the test load on a rotating platform contains all the information on the inertia characteristics of the body.
Similar content being viewed by others
REFERENCES
Alalykin, S.S., Bogatyrev, A.V., Ivanova, T.B., and Pivovarova, E.N., Determination of moments of inertia and the position of the center of mass of robotic devices, Vestn. Udmurt. Univ., Fiz. Khim. Prib. Metody Eksp. Fiz., 2014, no. 4, p. 79.
Alyshev, A.S., Mel’nikov, V.G., and Mel’nikov, G.I., Identification method for pendulum system moment of inertia with viscous damping, Nauch.-Tekh. Vestn. Inform. Tekhnol.,Mekh. Opt., 2016, vol. 16, no. 5, p. 928.
Belyakov, A.O. and Seiranyan, A.P., Determining the moments of inertia of large bodies from vibrations in elastic suspension, Mech. Solids, 2008, vol. 43, no. 2, p. 205–217.
Bogdanov, V.V., Panchenko, I.N., Nyakk, V.I., et al., RF Patent No. 2506551 (2014).
Laryushkin, P., Glazunov, V., and Erastova, K., On the maximization of joint velocities and generalized reaction in the workspace and singularity anaysis of parallel mechanisms, Robotica, 2019, vol. 37, p. 675.
Videnkin, N.A., Metrological support of automated measuring and computing systems for determining the geometry parameters of masses of spacecraft, Cand. Sci. (Tech. Sci.) Dissertation, Moscow, 2017.
Glazunov, V.A., Kheylo, S.V., and Tsarkov, A.V., The control complex robotic system on parallel mechanism, in Smart Electromechanical Systems: Group Interaction, Gorodetskiy, A.E. and Tarasova, I.L., Eds., Switzerland: Springer, 2018, p. 137.
Romashchenko, S.V., Morozkov, I.S., Shatrov, A.K., and Shevtsov, E.A., Determination of the moments of inertia of large-sized transformable structures of spacecraft, Aktual. Probl. Aviats. Kosmonavt., 2010, no. 6, p. 103.
Kloepper, R., Akita, H., Okuma, M., and Terada, S., An experimental identification method for rigid body properties enabled by gravity-depended suspension modeling, in Proceedings of the 1st Joint International Conference on Multibody System Dynamics, Lappeenranta, Finland, May 25–27,2010, p. 9.
Previati, G., Gobbi, M., and Mastinu, G., Measurement of inertia tensor - a review, in Proceedings of the 73rd Annual Conference of the Society of Allied Weight Engineers, Long Beach, CA, May 5,2014, p. 23.
Aleshin, A.K., A method to determine the mass and coordinates of the center of mass of a body in a given plane, J. Mach. Manuf. Reliab., 2011, vol. 40, no. 2, pp. 102–106.
Gernet, M.M. and Ratobyl’skii, V.F., Opredelenie momentov inertsii (Defining Moments of Inertia), Moscow: Mashinostroenie, 1977.
Kiselev, M.I., Kozlov, A.P., Morozov, A.N., Nazolin, A.L., Pronyakin, V.I., and Solov’ev, A.V., Measurement of the period of rotation of the turbofan shaft by the photoelectric method, Izmerit. Tekh., 1996, no. 12, p. 28.
Funding
This work was carried out with the support of the Russian Foundation for Basic Research, project no. 16-29-04273 ofi_m.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by M. Kromin
About this article
Cite this article
Aleshin, A.K. Method for Determination of the Inertia Characteristics of Bodies. J. Mach. Manuf. Reliab. 49, 1–7 (2020). https://doi.org/10.3103/S1052618820010045
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618820010045