Abstract
The problems of improving the accuracy of the definition of resistance to corrosive fatigue of the shafts of transmission gears, which operate under the effect of atmospheric precipitation and under variable complex loading (joint cyclical bend and torsion), were considered. According to the results of fatigue tests, the equations of the families of fatigue lines for the probability interval of no-failure P(N) = 50–99.9% were derived. The dependences to determining the coefficients of strength and durability in a wide interval of multicycle fatigue are obtained. The nomogram of these coefficients for a probabilistic estimate of the carrying capacity of the shafts at N = 105–108 cycles is given.
Similar content being viewed by others
REFERENCES
Vagapov, R.D., Veroyatnostno-determinicheskaya mekhanika ustalosti (Probabilistic-Deterministic Mechanics of Fatigue), Moscow: Nauka, 2003, p. 256.
Kogaev, V.P., Raschety na prochnost’ pri napryazheniyakh, peremennykh vo vremeni (Strength Calculation at Stresses Fluctuating with Time), Moscow: Mashinostroenie, 2003, p. 232.
Platonova, E.C., Improving the corrosion resistance of engineering parts, Vestn. PNIPU: Mashinostr. Materialoved., 2015, vol. 17, no. 3, p. 41.
Starostina, Zh.A., Creating a set of conditions for the development of domestic production of road construction equipment, in Sb. mat. VIII Mezhd. nauch.-prakt. konf. (Proceedings of the 8th International Conference on European Research: Innovation in Science, Education and Technology), Moscow: Izdat. Zh. MESKh, 2015, p. 5.
Shadrin, A.I. and Orkhon, L., Dependence of Baganursky mine excavator reliability index on lifetime, Izv. SO RAN, 2013, no. 2 (43), p. 120.
Oleinik, N.V., Vol’iev, A.V., Bershak, S.B., et al., Raschet detalei mashin na korrozionnuyu ustalost' (Calculation of Machine Parts for Corrosion Fatigue), Kiev: Tekhnika, 1990, p. 150.
Stakyan, M.G. and Sogomonyan, V.K., Diagnostics of fatigue fracture of construtionmashinery structural elements, in Proceedings of the Conference on Contemporary Problems of Architecture and Construction, Yerevan, Oct. 26–28,2016, p. 254.
Korolov, V., Vysotskyy, Y., and Filatov, Y., Design criteria of reliability and safety in the design of corrosion protection of structural steel, in Proceedings of the EUROCORR-2014 European Corrosion Congress on Improving Materials Durability: From Cultural Heritage to Industrial Applications, Pisa,2014, p. 88.
Stakyan, M.G., Mirakyan, G.G., and Margaryan, E.A., Equations of corrosion shaft fatigue curves subject to dispersion analysis of fatigue crack life, Izv. NAN RA i GIUA,Ser. TN, 2010, vol. 63, no. 1, p. 12.
Oleinik, N.V., Stakyan, M.G., Vol’chev, L.V., and Manukyan, G.A., Corrosion fatigue testing device, USSR Inventor’s Certificate No. 1317329, Byull. Izobret., 1987, no. 22, p. 3.
Chibukhchyan, S.S. and Stakyan, M.G., The operational reliability of the GAZELLE minibus, Mekhaniz. Stroit., 2017, no. 3 (873), p. 57.
Houshyar, A., Reliability and maintainability of machinery and equipment, Part 1: Accessibility and assessing machine tool R&M performance, Int. J. Model. Simul., 2004, vol. 24, no. 4, p. 201.
Praca, M., Uehara, S., and Ferreira, M., New polymeric coating on sputtered bearings for heavy-duty diesel engines, SAE Int. J. Engines, 2013, no. 6, p. 623.
Kushnarev, L.I., Chepurina, E.L., et al., The quality and reliability of domestic technology is the basis of its competitiveness, Trakt. Sel’khozmash., 2015, no. 11, p. 35.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by M. Kromin
About this article
Cite this article
Chibukhchyan, G.S., Stakyan, M.G. & Chibukhchyan, O.S. Improving the Carrying Capacity of Structural Elements of Vehicles by the Corrosive Strength Criterion. J. Mach. Manuf. Reliab. 48, 551–556 (2019). https://doi.org/10.3103/S1052618819060037
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618819060037