Abstract
The aspects of evaluating cyclical durability of screw joints are considered by the example of the main joint of the VVER-1000 nuclear reactor with a given record of operating load. Four variants of design are presented. The nonconservative essence of case three is noted. In the fourth case, the refined design requires additional in-service steps to guarantee the cyclic durability of the main joint pins.
Similar content being viewed by others
References
Makhutov, N.A., Vorob’ev, A.Z., Gadenin, M.M., Zatsarinnyi, V.V., et al., in Prochnost’ konstruktsii pri malotsiklovom nagruzhenii (Structural Strength at Low–Cycle Loading), Makhutov, N.A. and Romanov, A.N., Eds., Moscow: Nauka, 1983.
Makhutov, N.A., Deformatsionnye kriterii razrusheniya i raschet elementov konstruktsii na prochnost’ (Deformation Criteria of Fracture and Strengh Calculation of Engineering Components), Moscow: Mashinostroenie, 1981.
Makhutov, N.A., Konstruktsionnaya prochnost’, resurs i tekhnogennaya bezopasnost’ (Construction Strength, Resource and Technogenic Safety), Novosibirsk: Nauka, 2005.
Birger, I.A. and Iosilevich, G.B., Rez’bovye i flantsevye soedineniya (Threaded and Flanged Connections), Moscow: Mashinostroenie, 1990.
Birger, I.A., Shorr, B.F., and Iosilevich, G.B., Raschet na prochnost’ detalei mashin (Strength Calculation of Machine Elements Handbook), Moscow: Mashinostroenie, 1979.
Birger, H.A. and Iosilevich, G.B., Rez’bovye soedineniya (Threaded Connections), Moscow: Mashinostroenie, 1973.
Makhutov, N.A., Prochnost’ i bezopasnost’: Fundamental’nye i prikladnye issledovaniya (Strength and Safety: Fundamental and Applied Studies), Novosibirsk: Nauka, 2008.
Makhutov, N.A., Frolov, K.V., Zatsarinnyi, V.V., Kagan, V.A., et al., Prochnost’ i resurs vodo–vodyanykh energeticheskikh reaktorov (Strength and Resource of WWER), Romanov, A.N., Ed., Moscow: Nauka, 1988.
Makhutov, N.A., et al., Problemy prochnosti i bezopasnosti vodo–vodyanykh energeticheskikh reaktorov (Problems of Strength and Safety of WWER), Makhutov, N.A. and Gadenin, M.M., Eds., Moscow: Nauka, 2008.
Romanov, A.N., Deformation resistance of metal construction materials upon cyclic loading, J. Mach. Manuf. Reliab., 2012, vol. 41, no. 4, pp. 299–305.
Makhutov, N.A., Petrenya, Yu.K., Gadenin, M.M., and Ivanov, S.V., Factors of assessing stress–strain state, strength and lifetime of important threaded connections, Zavod. Lab., Diagn. Mater., 2014, vol. 80, no. 7, pp. 44–54.
Makhutov, N.A., Problems of diagnostics of threaded joints taking into account the mechanical properties of materials, Zavod. Lab., Diagn. Mater., 2014, vol. 80, no. 7, pp. 40–44.
Makhutov, N.A. and Zatsarinnyi, V.V., Theoretical and experimental assessment of threaded joint strength and resource based on elastoplastic deformations, J. Mach. Manuf. Reliab., 2015, vol. 44, no. 1, pp. 25–32.
Makhutov, N.A. and Zatsarinnyi, V.V., Effects of elastoplastic deformation and creep in threaded joints, Zavod. Lab., Diagn. Mater., 2015, vol. 81, no. 9, pp. 54–59.
PNAE (Rules and Regulations in Nuclear Energy) no. G–7–002–86, Norms for calculating the strength of equipment and pipelines of nuclear power plants, 1989.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.A. Makhutov, V.V. Zatsarinnyi, 2018, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2018, No. 4.
About this article
Cite this article
Makhutov, N.A., Zatsarinnyi, V.V. Analysis of Operational Loading Spectra and Cumulative Damage in Screw Joints. J. Mach. Manuf. Reliab. 47, 337–344 (2018). https://doi.org/10.3103/S105261881804009X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S105261881804009X