Abstract
The paper presents the results of studying the structure and physical and mechanical properties of a Ni–Co–Cr–Al–Y heat-resistant intermetallic compound coating, formed by the method of the high-energy plasma powder spraying on the working surfaces of turbine blades of a gas turbine engine in the initial state and after completing the designed resource (within ~28000 h), as part of a GTE-45-3 power unit of a thermal power plant (ОАО Yakutenergo).
Similar content being viewed by others
References
Baldaev, L.Kh., Renovatsiya i uprochnenie detalei mashin metodami gazotermicheskogo napyleniya (Renovation and Strengthening for Machines Elements by Means of Gas-Thermal Sputtering), Moscow: KKhT, 2004.
Tarasenko, Yu.P., Berdnik, O.B., Tsareva, I.N., and Fel’, Ya.A., The way to raise reliability and lifetime of turbine blades of gas transmission aggregates, Sbornik trudov yubileinoi konferentsii IMASh RAN “Problemy mashinovedeniya” (Proc. Jubilee Conf. of the Federal Budget-Funded Research Institute for Machine Science named after A.A. Blagonravov of the Russian Academy of Sciences “Problems of Engineering Science”), Moscow, 2008, pp. 528–531.
Zhukov, M.F., An’shakov, A.S., and Zasypkin, I.M., Elektrodugovye generatory s mezhelektrodnymi vstavkami (Electric Arch Generators with Interelectrode Insertions), Novosibirsk: Nauka, 1981.
Kolobov, Yu.R., Kablov, E.N., Kozlov, E.V., et al., Struktura i svoistva intermetallidnykh materialov s nanofaznym uprochneniem (Structure and Properties of Intermetallide Materials with Nanophase Strengthening), Moscow, 2008.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.P. Tarasenko, I.N. Tsareva, O.B. Berdnik, Ya.A. Fel’, L.A. Krivina, 2016, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2016, No. 3, pp. 70–76.
About this article
Cite this article
Tarasenko, Y.P., Tsareva, I.N., Berdnik, O.B. et al. Development and postoperation state of Ni–Co–Cr–Al–Y plasma heat-resistant coating. J. Mach. Manuf. Reliab. 45, 252–257 (2016). https://doi.org/10.3103/S1052618816030183
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618816030183