Abstract
In order to improve the efficiency and quality of estimation of the technical condition and residual service life of technical devices, a special approach has been devised, based on informational support and the automation of preparation for this process and its execution. The methods, models, and means developed represent the methodology of inspection of technical devices with regard to industrial safety. Information technology has been developed, along with the Intelligent Software System that implements it, to automate the collection, storage, and processing of the information necessary to support decision-making in the estimation of technical conditions and residual service life, which constitutes the basis of industrial safety inspection.
Similar content being viewed by others
References
Makhutov, N.A., Prochnost’ i bezopasnost’: fundamental’nye i prikladnye issledovaniya (Strength and Safety. Fundamental and Applied Researches), Novosibirsk: Nauka, 2008.
Berman, A.F., Nikolaichuk, O.A., and Yurin, A.Yu., The way to automate prediction of technical state and residual lifetime for unique machines and devices elements, Zavod. Lab., 2009, no. 3, pp. 48–57.
Kuznetsov, K.A., Kuznetsov, A.M., and Korchagin, A.P., Reasons of technical devices damages appeared after long-term exploitation, incidents and accidents, Bezopasn. Truda Prom., 2013, no. 4, pp. 56–60.
Luger, G.F., Artificial Intelligence: Structures and Strategies for Complex Problem Solving, Addison-Wesley, 2005.
Berman, A.F., Nikolaichuk, O.A., and Yurin, A.Yu., Intellectual data system for analyzing failures, J. Mach. Manuf. Reliab., 2012, vol. 41, no. 4, p.337.
Smirnov, V.A., New version of ARMID-EXPERT software for technical state monitoring and automated diagnosing of devices faults. http://www.vibration.ru/armid4-32bit/armid4-32bit.shtml. Cited 06.12.2012.
Popov, G.V., Ignat’ev, E.B., Vinogradova, L.V., et al., “Diagnostica+”: expert estimation system of electrical equipment, Elektr. Stants., 2011, no. 5, pp. 36–45.
Andrus, S.T., Kosterin, S.P., Davidenko, I.V., et al., The way to apply smart systems for expending lifetime of oil-filled equipment, Avtomatiz. IT Energet., 2009, no. 4, pp. 12–19.
Mandel’, I.D., Klasternyi analiz (Cluster Analysis), Moscow: Finansy i statistika, 1988.
Prakticheskaya diagnostika. Sb. statei: v 3 t. (Practical Diagnostics. Collection of Scientific Works in 3 Vols.), Kuznetsov, A.M., Ed., Irkutsk: Irkutsk Research and Designing Institute of Chemical and Petrochemical Engineering, 2009.
Korchagin, A.P., Barinova, N.V., Kuznetsov, A.M., and Kuznetsov, K.A., Rassledovanie intsidentov i avarii na opasnykh proizvodstvennykh ob”ektakh (Accident Investigation at Dangerous Industrial Objects), Irkutsk: Irkutsk National Research Technical Univ., 2011.
The way to raise the estimation efficiency of technical state and residual lifetime of Irkutsk Research Institute for Chemical Machine Building equipment, Preprint of Research Institute for Chemical Machine Building, 2013.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © K.A. Kuznetsov, 2016, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2016, No. 1, pp. 37–43.
About this article
Cite this article
Kuznetsov, K.A. Methods, models, and means of efficiency improvement in the estimation of the technical condition and residual service life of technical devices. J. Mach. Manuf. Reliab. 45, 32–37 (2016). https://doi.org/10.3103/S1052618815060084
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618815060084