Abstract
On the basis of the methods of thermoelasticity, a mathematical description of the model of partial closure of a curved crack in a plane with the help of an induced temperature field was carried out. The determination of unknown contact stresses and the sizes of the contact zones in each approximation is reduced to the solution of a singular integral equation. Normal and tangential contact stresses and the values of the size of the tip zones where the faces of a curved crack close are found.
Similar content being viewed by others
References
Finkel’, V.M., Fizicheskie osnovy tormozheniya razrusheniya (Physical Foundations of Fracture Deceleration), Moscow: Metallurgiya, 1977.
Parton, V.Z. and Morozov, E.M., Mekhanika uprugoplasticheskogo razrusheniya (Mechanics of Elastic-Plastic Fracture), Moscow: Nauka, 1985.
Kadiev, R.I. and Mirsalimov, V.M., Heat source effect onto crack growth dynamic, Vestn. Dagestan. Gos. Univ., 2001, no. 4, pp. 69–73.
Raschety na prochnost’, ustoichivost’ i kolebaniya v usloviyakh vysokikh temperatur (Strength, Stability and Oscillations Calculations under High Temperatures Conditions), Gol’denblat, I.I., Ed., Moscow: Mashinostroenie, 1965.
Timoshenko, S.P., Soprotivlenie materialov (Strength of Materials), Moscow: Nauka, 1965, vol. 2.
Parkus, H., Instationare Warmespannungen, Wien: Springer, 1959.
Muskhelishvili, N.I., Nekotorye osnovnye zadachi matematicheskoi teorii uprugosti (Some Main Problems of Mathematical Elasticity Theory), Moscow: Nauka, 1966.
Kalandiya, A.I., Matematicheskie metody dvumernoi uprugosti (Mathematical Methods of 2D Elasticity), Moscow: Nauka, 1973.
Mirsalimov, V.M., Neodnomernye uprugoplasticheskie zadachi (Multidimensional Elastic-Plastic Problems), Moscow: Nauka, 1987.
Morozov, E.M., Strength calculation according to failure stage, in Deformatsiya i razrushenie pri termicheskikh i mekhanicheskikh vozdeistviyakh (Deformation and Fracture under Thermal and Mechanical Impacts), Moscow: Atomizdat, 1969, issue 3, pp. 87–90.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.M. Mirsalimov, A.B. Mustafayev, 2014, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2014, No. 6, pp. 66–73.
About this article
Cite this article
Mirsalimov, V.M., Mustafayev, A.B. Partial closure of a curved crack in a plane using an induced thermoelastic stress field. J. Mach. Manuf. Reliab. 43, 515–521 (2014). https://doi.org/10.3103/S1052618814060065
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618814060065