Abstract
The basic results of fundamental and applied studies obtained by the Department for Strength, Survivability and Machine Safety, in the framework of cooperation with the leading foreign and Russian scientific centers within the recent years, are presented. Modern trends in the problems of strength, service life, survivability and safety of machines and structures are discussed. The prospective directions of scientific investigations at the modern stage of development of machines science are discussed.
Similar content being viewed by others
References
Prochnost’, resurs, zhivuchest’ i bezopasnost’ (Strength, Lifetime, Durability, and Safety), Makhutov, N.A., Ed., Moscow: Knizhnyi dom “LIBROKOM”, 2008.
Matvienko, Yu.G., Modeli i kriterii mekhaniki razrusheniya (Models and Criteria of Fracture Mechanics), Moscow: Fizmatlit, 2006.
Makhutov, N.A., Prochnost’ i bezopasnost’: fundamental’nye i prikladnye issledovaniya (Strength and Safety: Fundamental and Applied Researches), Novosibirsk: Nauka, 2008.
Maxytov, N.A., Petrov, V.P., Reznikov, D.O., et al., The way to make safe strategically important objects by means of lowering their sensitivity, Probl. Bezopasn. Chrezvychain. Situats., 2009, no. 2, pp. 50–69.
Makhutov, N.A. and Reznikov, D.O., A comparative assessment of specification-based and risk-management-based approaches to the security assessment of complex technical systems, J. Mach. Manuf. Reliab., 2011, vol. 40, no. 6, p. 579.
Makhutov, N.A., A criterion base for assessment of strength, lifetime, reliability, survivability, and security of machines and man-machine systems, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 5, pp. 364.
Ganiev, R.F., Nelineinye rezonansy i katastrofy. Nadezhnost’, bezopasnost’ i besshumnost’ (Nonlinear Resonances and Catastrophes. Reliability, Safety, and Quietness), Moscow: Regular and Chaotic Dynamics, 2013.
Makhutov, N.A., Fomin, A.V., Ivanov, V.I., et al., Integrated diagnostics of limit states and early warning of emergency conditions of structures, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 2, p. 109.
Matvienko, Yu.G., Fomin, A.V., Ivanov, V.I., et al., Complex research of composite materials with fragrance tense-coatings and acoustic emission, Zavod. Lab., Diagn. Mater., 2014, no. 1, pp. 46–50.
Mikhalev, Yu.K., Fomin, A.V., and Maslov, S.V., Full-scale thermal-strain studies of deflected modes of nuclear power plant equipment, J. Mach. Manuf. Reliab., 2008, vol. 37, no. 5, p. 517.
Khairetdinov, V.U., Mamontov, S.V., Malyshev, R.Yu., et al., The way to research thermal strained state of atomic electric power plants pipelines by using inverse heat and heat-elastic problems, Tyazh. Mashinostr., 2009, no. 11, pp. 11–17.
Makhutov, N.A., Razumovskii, I.A., Kosov, V.S., et al., The way to research residual stresses by using electronic digital spectrum interferometry in field conditions, Zavod. Lab., Diagn. Mater., 2008, no. 5, pp. 47–51.
Razumovskii, I.A. and Chernyatin, A.S., Experimental numerical method of loading estimation for structures with surface cracks, J. Mach. Manuf. Reliab., 2009, vol. 38, no. 3, p. 247.
Razumovskii, I.A. and Chernyatin, A.S., An experimental and computational method for investigation of residual stresses in two-layer construction members using hole drilling, J. Mach. Manuf. Reliab., 2011, vol. 40, no. 4, p. 386.
Razumovskii, I.A. and Chernyatin, A.S., The way to determine loading and defects for structure elements on the base of minimal disagreement between experimental and calculation data, Zavod. Lab. Diagn. Mater., 2012, no. 1, pp. 71–78.
Matvienko, Yu.G., Analysis of permissible dimensions of cracklike defects based on a diagram of crack-growth resistance, J. Mach. Manuf. Reliab., 2007, vol. 36, no. 2, p. 199.
Matvienko, Yu.G., Priimak, O.A., and Elksnin, V.V., A technique for evaluating the permissible depth of an extended surface flaw in a pressurized vessel, J. Mach. Manuf. Reliab., 2007, vol. 36, no. 6, p. 542.
Matvienko, Yu.G., Fracture mechanics approaches in the analysis of strains and fractures of bodies with notches and scotches, J. Mach. Manuf. Reliab., 2008, vol. 37, no. 5, p. 469.
Matvienko, Yu.G., Development of models and criteria of notch fracture mechanics, Struct. Integr. Life, 2011, vol. 11, no. 1, pp. 3–7.
Matvienko, Yu.G., Safety factors in structural integrity assessment of components with defects, Int. J. Struct. Integr., 2013, vol. 4, no. 4, pp. 457–476.
Kaplunov, S.M., Val’es, N.G., Gorelov, E.V., et al., Mathematical model approach of hydrodynamic vibration generation mechanisms of heat-exchange tube bundles, J. Mach. Manuf. Reliab., 2008, vol. 37, no. 3, p. 300.
Matvienko, Yu.G. and Bubnov, M.A., Contact interaction and fracture of the surface layer during rolling friction and wedging, J. Mach. Manuf. Reliab., 2009, vol. 38, no. 4, p. 349.
Arkhipov, V.E., Londarskii, V.E., Moskvitin, G.V., et al., An increase in life times of products with gas-dynamic spray coatings, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 6, pp. 495.
Polilov, A.N. and Malakhov, A.V., Construction of trajectories of the fibers which bypass a hole and their comparison with the structure of wood in the vicinity of a knot, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 4, p. 306.
Bezopasnost’ Rossii. Pravovye, sotsial’no-ekonomicheskie i nauchno-tekhnicheskie aspekty: mnogotomnoe izdanie (Russian Safety. Law, Social-Economical and Scientific-Technical Aspects: Multivoliume Work), Moscow: Znanie, 1998–2013.
Obespechenie resursa i zhivuchesti vodo-vodyanykh energeticheskikh reaktorov (The Way to Secure Lifetime and Durability of Water-to-Water Power Reactors), Makhutov, N.A. and Gadenin, M.M., Eds., Moscow: Nauka, 2009.
Napryazhenno-deformirovannoe sostoyanie ZhRD (Stresses-Deformed State of Liquid Propellant Jet Engine), Makhutov, N.A. and Radchuk, V.S., Eds., Moscow: Nauka, 2013.
Matvienko, Yu.G., Two approaches to taking nonsingular T-stresses into account in the criteria of fracture mechanics for bodies with notches, J. Mach. Manuf. Reliab., 2011, vol. 40, no. 5, p. 494.
Matvienko, Yu.G., Nonsingulat T-stresses in two-parameter problems of fracture mechanics, Zavod. Lab., Diagn. Mater., 2012, no. 2, pp. 51–58.
Matvienko, Yu.G., Shlyannikov, V.N., and Boychenko, N.V., In-plane and out-of-plane constraint parameters along a three-dimensional crack-front stress field under creep loading, Fatigue Fracture Eng. Mater. Struct., 2013, vol. 36, pp. 14–24.
Hadj Meliani, M., Azari, Z., Pluvinage, G., and Matvienko, Yu.G., The effective t-stress estimation and crack paths emanating from u-notches, Eng. Fracture Mech., 2010, vol. 77, pp. 1682–1692.
Matvienko, Yu.G., Maximum average tangential stress criterion for prediction of the crack path, Int. J. Fracture, 2012, vol. 176, pp. 113–118.
Matvienko, Yu.G., Chernyatin, A.S., and Razumovskii, I.A., Numerical analysis of the components of the three-dimensional non-singular stress field at a mixed-type crack tip, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 4, p. 293.
Matvienko, Yu.G., Imitation simulation for analyzing fracture mechanics parameters for non-standard samples, Zavod. Lab., Diagn. Mater., 2013, no. 10, pp. 50–56.
Hadj Meliani, M., Matvienko, Yu.G., and Pluvinage, G., Two-parameter fracture criterion (K ρ-c − T ef,c) based on notch fracture mechanics, Int. J. Fracture, 2011, vol. 167, pp. 173–182.
Matvienko, Yu.G., Two-parameter fracture mechanics in contemporary strength problems, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 5, pp. 374.
Matvienko, Yu.G. and Muravin, E.L., Parameters of fracture mechanics under combined loading by normal separation and in-plane shear, J. Mach. Manuf. Reliab., 2009, vol. 38, no. 5, p. 438.
Gubeljak, N., Likeb, A., Predan, J., and Matvienko, Yu.G., Comparison between fracture behaviour of pipeline ring specimens and standard specimens, Key Eng. Mater., 2014, vols. 577–578, pp. 637–640.
Matvienko, Yu.G., Pisarev, V.S., and Eleonsky, S.I., Estimation of stress field components ahead of narrow notches by experimental local displacement measurements, Frattura Integrità Strutturale, 2013, vol. 25, pp. 20–26.
Chernyatin, A.S., Matvienko, Yu.G., and Razumovsky, I.A., Combining experimental and numerical analysis to estimate stress fields along the surface crack front, Frattura Integrita Strutturale, 2013, vol. 25, pp. 15–19.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.G. Matvienko, 2014, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2014, No. 3, pp. 80–89.
About this article
Cite this article
Matvienko, Y.G. Modeling and fracture criteria in current problems of strength, survivability and machine safety. J. Mach. Manuf. Reliab. 43, 242–249 (2014). https://doi.org/10.3103/S1052618814030066
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618814030066