Abstract
The possibility of estimating the durability of constructive steels depending on the nature of external irregular cyclic loading, schematized by block loading, is shown. The calculation is based on parameters of an initial durability curve obtained at regular cyclic loading and irregularity parameter estimated by completeness of loading spectrum. It was accepted that the durability curves are equidistant at regular and irregular cyclic loading. The presented methodology provides good results at estimating durability in the region 103–107 cycles.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Kogaev, V.P., Makhutov, N.A., and Gusenkov, A.P., Raschety detalei mashin i konstruktsii na prochnost’ i dolgovechnost’ (Strength and Lifetime Calculation of Machine Elements and Structures), Moscow: Mashinostroenie, 1985.
Buxbaum, O. and Zaschel, J.M., Beschreibung stochastischer Beanspruchungs-Zeit-Funktion, in Povedenie stali pri tsiklicheskikh nagruzkakh (Steel Behavior under Cyclic Loadings), Dal’, V., Ed., Darmstadt: Fraunhofer LBF, 1977; Moscow: Metallurgiya, 1982.
Gassner, E., Griese, F., and Haibach, E., Ertagbare Spannungen und Lebensdauer einen Schweissverbindung Stahl St37 bei verschiedenen Formen des Beanspruchungkollektivs (Premissible Stress to and Service Life of Welds in ST37 Steel Subjected to Various Loading Models), Arch. Eisenhuttensesen, 1964, vol. 35, no. 3, pp. 255–267.
Fischer, R., Huck, H., Kobler, G., and Schutz, W., Eine dem stationaren gaussprozess verwandte Beanspruchungs, Z. Funkt. Betriebstaetigkeitsversuche, 1977, no. 30, pp. 28–56.
Gassner, E., Zur experimentellen Lebendauermittlung von Konstruktionselementen mit rufallsartigen Beanspruchunge, Masterprüng, 1973, no. 16, pp. 197–205.
Haibach, E., The Allowable Stresses under Variable Amplitude Loading of Welded Joints, Proc. Conf. on Fatigue of Welded Struct., 1971, vol. 2, pp. 328–346.
Bagmutov, V.P. and Savkin, A.N., Prognozirovanie dolgovechnosti konstruktsionnykh materialov pri regulyarnom i neregulyarnom nagruzhenii s uchetom razlichnykh mekhanizmov povrezhdeniya (Lifetime Prediction for the Structure Materials Subjected to Regular and Irregular Loading by Considering Different Damaging Mechanisms), Volgograd: VolgGTU, 2008.
Fischer, R. and Haibakh, E., Modelirovanie funktsii nagruzheniya v opytakh po otsenke materialov (Simulation von Beanspruchungs-Zeit-Funktionen in Versuchen zur Beurteilung von Werkstoffen), Dahl, W., Ed., Dusseldorf: Verlag Stahleisen, 1979; Moscow: Metallurgiya, 1982, pp. 368–405.
Osterman, H. and Grubishich, V., Vliyanie materiala na dopustimuyu velichinu tsiklicheskoi nagruzki (Material Effect onto Permissible Cyclic Loading), Dahl, W., Ed., Moscow: Metallurgiya, 1982.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.N. Savkin, A.A. Sedov, 2011, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2011, No. 4, pp. 50–55.
About this article
Cite this article
Savkin, A.N., Sedov, A.A. Forecasting material durability at block variable cyclic loading. J. Mach. Manuf. Reliab. 40, 343–347 (2011). https://doi.org/10.3103/S1052618811040169
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618811040169