Abstract
Composite products under vacuum infusion are formed by impregnating a reinforcing filler with resin by means of a vacuum. The task of designing the infusion process involves the development of a system of infusion. A mathematical model of the impregnation process which allows carrying out virtual technological experiments in order to find the optimal method of product impregnation is described. Examples of numerical simulation are given.
Similar content being viewed by others
References
Kerber M.L., Vinogradov V.M., Golovkin G.S., et al., Polimernye kompozitsionnye materialy: struktura, svoistva, tekhnologiya (Polymer Composite: Structure, Characteristics, Technology) Berlin, A.A., Ed., St. Petersburg: Professiya, 2008, 560 p.
Gurtovik I.G., Sokolov V.I., Trofimov N.N., et al., Radioprozrachnye izdeliya iz stekloplastikov (Radiotransparent Products Made of Fiberglass), Moscow: Mir, 2002, 368 p.
Marshall R., All about Powerboats: Understanding Design and Performance, McGraw-Hill Professional, 2002.
Koefoed M., Modelling and Simulation of the VARTM. Process for Wind Turbine Blades, Denmark, Aalborg University, Institute of Mechanical Engineering, Special report no. 50, January 2003.
Ushakov A., Klenin Yu., Ozerov S., Development of Mmodular Arched Bridge Design. Proceedings of 5th International Engineering and Construction Conference (IECC 5), USA, CA, Irvine, 2008, pp. 95–101.
Aravin V.I., Numerov S.N., Teoriya dvizheniya zhidkostei i gazov v nedeformiruemoi srede (The Theory of Liquids and Gases Motion in the Free of Distortion Medium), Moscow: Gostekhizdat, 1953.
Barenblatt G.I., Entov V.M., Ryzhik V.M., Teoriya nestatsionarnoi filtratsii zhidkosti i gaza (Theory of Nonstandard Fluid and Gas Filtration), Moscow: Nedra, 1972.
Masket M., Techenie odnorodnykh zhidkostei v poristoi srede (The Flow of Homogeneous Fluids in Porous Media), Moscow-Izhevsk: Institute of Computer Research, 2004.
Segerlind L., Primenenie metoda konechnykh elementov (Application of Finite Elements Method), Moscow: Mir, 1979.
Zenkevich O., Morgan K., Konechnye elementy i approksimatsiya (Finite Elements and Their Approximation), Moscow: Mir, 1986, 318 p.
Joshi S.C., Lam Y.C., Liu X.L., Composites Part A: Applied Science and Manufacturing, 2000, vol. 31, pp. 1061–1068.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.A. Safonov, 2010, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2010, No. 6, pp. 70–78.
About this article
Cite this article
Safonov, A.A. Mathematical modeling for impregnation of reinforcing filler of fiberglasses during vacuum infusion. J. Mach. Manuf. Reliab. 39, 568–574 (2010). https://doi.org/10.3103/S1052618810060105
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618810060105