Abstract
Some problems of how to use modern experimental facilities—an Inston 8850 biaxial servohydraulic test system and Vic 3D Limess digital optical system—for analyzing the fields of deformation and displacements in order to investigate the regularities of material inelastic deformation and failure in a complicated stressed-deformed state are examined. Proportional loading with different ratios between the axial deformation and the shear angle is implemented. Diagrams of the material deformation for different stress states are generated. The diagrams of material deformation with a drop-down branch are obtained under uniaxial tension for samples with different ratios between the length and diameter. Information about the deformation fields taking place in the plates with stress concentrators determined by means of the correlation of digital images are presented.
Similar content being viewed by others
References
Chausov, N.G., Zasimuk, E.E., Markashova, L.I., Vil’deman, V.E., et al., Features of Plastic Materials Deformation under Dynamical Nonequilibrium Processes, Tekhnich. Diagn. Nerazrushayushchii Kontrol’, 2008, no. 4, pp. 54–63.
Chausov, N.G., Zasimchuk, U.E., Markashova, L.I., Vil’deman, V.E., et al., Features of Plastic Materials Deformation under Dynamical Nonequilibrium Processes, Zavodskaya laboratoriya. Diagn. Mater., 2009, no. 6, pp. 52–59.
Chausov, N.G., Pilipenko, A.P., Paratsa, V.N., and Videl’man, V.E., Control Methods for Metals Plastic Flow Mechanisms, in Deformation and Fracture of Materials and Nanomaterials-DFMN 2007, Bannykh, O.A., et al., Eds., Moscow: Interkontakt Nauka, 2007, pp. 71–73.
Vil’deman, V.E., Mechanics of Overcritical Deformation and the Problems of Strength Analysis, Int. J. Comput. Civil Struct. Eng.: Moscow State Univ. Civil Eng., 2008, vol. 4,issue 2, pp. 43–44.
Anin, B.D. and Zhigalkin, V.M., Povedenie materialov v usloviyakh slozhnogo nagruzheniya (Materials Behavior under Conditions of Complex Loading), Novosibirsk: SO RAN, 1999.
Lebedev, A.A., Koval’chuk, B.I., and Gignyak, F.F., Mekhanicheskie svoistva konstruktsionnykh materialov pri slozhnom napryazhennom sostoyanii (Mechanical Properties of Structural Materials under Complex Stress State), Kiev: Izdat. dom “In Yure,” 2003.
Lokoshchenko, A.M., Modelirovanie protsessa polzuchesti i dlitel’noi prochnosti metallov (Simulation of Creeping Process and Metals Long-Time Durability), Moscow: MGIU, 2007.
Albaut, G.N., Kharinova, N.V., and Romanova, A.A., Experimental Solution of Crack Mechanics Problems, Fiz. Mezomekhan., 2004, vol. 7,special issue, part 1, pp. 363–366.
Kornev, V.M., Tensions Distribution and Crack Opening in Prefailure Area (Neuber-Novozhilov Approach), Fiz. Mezomekhan., 2004, vol. 7, no. 3, pp. 53–62.
Mavlyutov, R.R., Kontsentratsiya napryazhenii v elementakh aviatsionnykh konstruktsii (Tensions Concentration for Aircraft Structures Elements), Moscow: Nauka, 1981.
Videl’man, V.E., Sokolkin, Yu.V., and Tashkinov, A.A., Mekhanika neuprugogo deformirovaniya i razrusheniya kompozitsionnykh materialov (Mechanics of Inelastic Deformation and Failure for Composite Materials), Moscow: Nauka. Fizmatlit, 1997.
Sutton, M.A., Orteu, J.-J., and Schreier, H., Image Correlation for Shape, Motion and Deformation Measurements, Columbia: Univ. of South Carolina, 2009.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.E. Vil’deman, T.V. Sannikova, M.P. Tret’yakov, 2010, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2010, No. 5, pp. 106–111.
About this article
Cite this article
Vil’deman, V.E., Sannikova, T.V. & Tret’yakov, M.P. Experimental investigation of material deformation and failure regularities in a flat stressed state. J. Mach. Manuf. Reliab. 39, 492–496 (2010). https://doi.org/10.3103/S1052618810050146
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618810050146