Abstract
Mathematical models of volume reduced operating time and cutting and instantaneous cutting capacity for the operation of a flat creep feed grinding of horizontal surfaces by a circle of direct profile at all stages of the process (incision, additional set of depth, a constant length of arc of contact and exit) are obtained. On the basis of the models obtained, the maximum indicators of the process reliability are defined. The regularities of changes in the components of the force of deep grinding with a continuous revision of the circle of the blanks of titanium alloy BT8 are studied. A correlation between the instantaneous cutting power and the grinding force that allows the patterns of change in the actual treatment conditions to be predicted is established.
Similar content being viewed by others
References
Silin, S.S., Leonov, B.N, Khrulkov, V.A, et al., Optimizaciya tekhnologui glubinnogo shlifovaniya (Optimization of the Technology of Deep Grinding), Moscow: Mashinostroenie, 1989.
Starkov, V.K., Shlifovanie vysokoporistymi krugami (Grindung with Highly Porous Circles), Moscow: Mashinostroenie, 2007.
GOST (State Standard) 4.349-85: The System of Indicators of Product Quality. Abrasive Instrument. Nomenclature of indices, 1986.
GOST (State Standard) 21445-84: Materials and abrasive tools. Terms and definitions, 1986.
Maslov, E.N., Teoriya shlifovaniya metallov (The Theory of Metals Grinding), Moscow: Mashinostroenie, 1974.
Nosenko, V.A., Shlifovanie adgeozionno-aktivnyh metallov (Grinding of Adhesion-Active Metals), Moscow: Mashinostroenie, 2000.
Nosenko, V.A., Danilenko, M.V., Belukhin, R.A., et al., Russian Inventors Certificate no. 2009615802, Buyll. Izobret., 2009, no. 8.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.A. Nosenko, S.V. Nosenko, 2010, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2010, No. 4, pp. 92–98.
About this article
Cite this article
Nosenko, V.A., Nosenko, S.V. Mathematical models of operating time and cutting capacity for various stages of flat creep feed grinding of horizontal surface by circle of direct profile. J. Mach. Manuf. Reliab. 39, 380–385 (2010). https://doi.org/10.3103/S1052618810040138
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618810040138