Abstract
The solution obtained for the distribution of a long contact load with the bolt pressure on the wall of a hole in abutting members of a shearing joint is corrected and extended to the more general case where all members of a joint are made from materials differing in their mechanical characteristics. It is shown that the difference in the elastic modulus of materials of the fastening and abutting members affects the distribution of contact pressure significantly less than the ratio of their diameter and thickness.
Similar content being viewed by others
References
Kozhevnikov, V.F., Bolt Contact with Joint Elements of Shear Rivet Joint, Problemy mashinostroeniya i nadezhnosti mashin, 2002, no. 1, pp. 47–53.
Prochnost’, ustoichivost’, kolebaniya. Spravochnik. T. 1 (Durability, Stability, Oscillations. Handbook. Vol. 1), Birger, I.A. and Panovko, Ya.G., Eds., Moscow: Mashinostroenie, 1968.
Kozhevnikov, V.F., Stresses Concentration around Bolt-Holes in Multilane Shear Connections, Aviatsionnaya promyshlennost’, 1984, no. 2, pp. 5–7.
Arson, L.D., Ryabkov, V.I., and Shelomov, N.A., The Way to Estimate the Elasticity of Bolt Axis, Loaded by Transverse Force, and Specific Pressure Distribution in Articulation Joint, Samoletostroenie i tekhnika vozdushnogo flota, 1970, issue 19, pp. 87–94.
Barrois, W., Stress and Displacement due to Load Transfer by Fastener in Structural Assemblies, Eng. Fracture Mech., 1972, vol. 10, no. 1, pp. 115–176.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.F. Kozhevnikov, 2009, published in Problemy Mashinostroeniya i Mashin, 2009, No. 4, pp. 37–42.
About this article
Cite this article
Kozhevnikov, V.F. Effect of the difference of materials of the fastening and abutting members of shearing joint on the distribution of contact pressure. J. Mach. Manuf. Reliab. 38, 344–348 (2009). https://doi.org/10.3103/S1052618809040074
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618809040074