Abstract
On the base of minimax criterion, how to determine the optimal form of a contact spot between a plate and supports during bending has been analyzed. A closed set of algebraic equations permitting the minimalization of the values of failure parameters (the coefficients of failure intensities) as a dependence on plate geometry has been developed. The discovered form of a contact spot between a plate and a support increases the load-carrying ability of a bending plate.
Similar content being viewed by others
References
Mirsalimov, V.M. and Allahyarov, E.A., The Breaking Crack Build-Up in Perforated Planes by Uniform Ring Switching Intern. Journal of Fracture, 1996, vol. 79, no. 1, pp. 17–21.
Gardzhiev, G.M. and Mirsalimov, V.M., Obratnaya zadacha teorii uprugosti dlya sostavnogo tsilindra kontaktnoi pary (The Reverse Task of Elastic Theory for the Contact Pair of Complex Cylinder), Moscow: Fizmatlit, 2003.
Gardzhiev, G.M. The Ways to Determine an Optimal Tightness of the Contact Pair of Complex Cylinder by Considering the Temperature Stresses and Rough Internal Contour, Izv. Vuzov. Mashinostroenie, 2003, no. 7, pp. 15–23.
Gardzhiev, G.M., Optimal Design of Contact Pair of Complex Cylinder, Probl. Mashinostr. i Nadezhnosti Mashin, 2003, no. 5, pp. 71–86.
Gardzhiev, G.M. and Mirsalimov, V.M., Optimal Design of Contact Pair of Complex Cylinder-Piston, Trenie i Iznos, 2004, vol. 25, pp. 466–473.
Mirsalimov, V.M. and Bakhyshov, F.A., The Reverse Task of Failure Mechanics of Complex Perforated Plate under Bending, Probl. Mashinostr. i Nadezhnosti Mashin, 2005, no. 5, pp. 28–37.
Mirsalimov, V.M., The Optimal Design of Complex Cylinder, Materialy, Tekhnologii, Instrumenty, 2006, vol. 11, no. 3, pp. 13–16.
Mirsalimov, V.M., Stressed State Minimization of the Disk Set to Rotating Shaft, Trenie i Iznos, 2006, vol. 27, pp. 264–268.
Mirsalimov, V.M., Stressed State Minimization of the Complex Cylinder, Probl. Mashinostr. i Nadezhnosti Mashin, 2006, no. 6, pp. 97–101.
Mirsalimov, V.M., The Optimal Design of Complex Plate Weaken by Periodical Cracks System, Izv. RAN. MTT, 2007, no. 2, pp. 75–86.
Muskhelishvili, N.I., Nekotorye osnovnye zadachi matematicheskoi teorii uprugosti, (The Basic Problems of Mathematical Elastic Theory), Moscow: Nauka, 1966.
Grigoluk, E.I., and Fil’shtinskii, L.A., Perforirovannye plastiny i obolochki (Perforated Plates and Shells), Moscow: Nauka, 1970.
Mirsalimov, V.M., The Interaction Between Periodical System of Elastic Inclusions and Straightline Cracks in Isotropic Medium, PMTF, 1978, no. 1, pp. 164–174.
Mirsalimov, V.M., Razrushenie uprugikh i uprugoplasticheskikh tel s treshchinami (The Failure of Elastic and Elastic-Plastic Solids with Cracks), Baku, ELM, 1984.
Savruk, M.P., Dvumernye zadachi uprugosti dlya tel s treshchinami (The Two-Dimensional Elastic Problems for the Solids with Cracks), Kiev: Naukova Dumka, 1981.
Mirsalimov, V.M., Neodnomernye uprugoplasticheskie zadachi (Nonuniform Elastic-Plastic Problems), Moscow: Nauka, 256.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.M. Mirsalimov, Kh.I. Kazymov, 2009, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2009, No. 2, pp. 30–39.
About this article
Cite this article
Mirsalimov, V.M., Kazymov, K.I. The reverse task of failure mechanics of column-supported plates. J. Mach. Manuf. Reliab. 38, 135–143 (2009). https://doi.org/10.3103/S105261880902006X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S105261880902006X