Abstract
Fracture mechanics models and criteria for bodies with cracks have been developed to analyze strains and fractures of bodies with notches and scotches. Criterion equations and corresponding crack growth resistance diagrams for a body with a notch taking into account the changes in the degree of strain constraint at the notch apex due to finiteness of its apex radius rounding and a nonsingular stress component (T-stresses) have been considered. Analytical relations for calculating the J-integral in the case of bodies with blunt U-and V-notches under elastic and plastoelastic loading have been given. Capabilities of the method of separable functions for the experimental study of plastoelastic crack growth resistance for nonstandard samples with scotches have been presented.
Similar content being viewed by others
References
Matvienko, Yu.G., Analysis of Admissible Sizes of Crack-Like Defects Based on Crack Growth Resistance Diagrams, Problems of Mechanical Engineering and Machine Safety, 2007, no. 2, pp. 110–115.
Proceedings of the International Conference on Fitness-for-Service, Germany: GKSS research Centre Geesthacht, 2007, p. 308.
Matvienko, Yu.G., Modeli i kriterii mekhaniki razrusheniya (Models and Criteria of Fracture Mechanics), Moscow: FIZMATLIT, 2006, p. 328.
Matvienko, Yu.G., Effect of Biaxial Loading on Crack Growth Resistance Diagrams of Bodies with Cracks and thin Notches, Problems of Mechanical Engineering and Machine Safety, 2006, no. 5, pp. 37–41.
Matvienko, Yu.G., Priimak, O.A. and Elksnin, V.V., Methods of Evaluating Admissible Depth of a Lengthy Surface Defect in Pressurized Cylinders, Problems of Mechanical Engineering and Machine Safety, 2007, no. 6, pp. 49–54.
Williams, M.L., On the Stress Distribution at the Base of a Stationary Crack. Journal of Applied Mechanics, 1957, vol. 24, pp. 109–114.
Broberg, K.B., Influence of T-stress, Cohesive Strength and Yield Strength on the Competition between Decohesion and Plastic flow in a Crack Edge Vicinity. International Journal of Fracture, 1999, vol. 100, pp. 133–142.
Berto, F., Lazzarin, P. and Matvienko, Yu.G., J-integral Evaluation for U-and V-blunt Notches under Mode I Loading and Materials Obeying a Power Hardening Law. International Journal of Fracture, 2007, vol. 146, pp. 33–51.
Matvienko, Yu.G., Concepts of Separable Functions is Experimental Fracture Mechanics, Factory Laboratory. Material Diagnostics, 2006, no. 2, pp. 36–44.
Kim, Y.S., Matvienko, Yu.G. and Jeong, H.C., Development of Experimental Procedure Based on the Load Separation Method to Measure the Fracture Toughness of Zr-2.5Nb Tubes. Key Engineering Materials, 2007, vol. 345–346, pp. 449–452.
Capelle, J., Gilgert, J., Matvienko, Yu.G. and Pluvinage, G., Comparison of Methods to Measure the Resistance to Fracture Emanating from Scratches in Gas Pipes. In: Proceeding of the ICF Interquadrennial Conference “Fracture Mechanics in Design of Fracture Resistant Materials and Structures”, 7–12 June, 2007.
Author information
Authors and Affiliations
Additional information
Original Russian Text © Yu.G. Matvienko, 2008, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2008, No. 5, pp. 64–72.
About this article
Cite this article
Matvienko, Y.G. Fracture mechanics approaches in the analysis of strains and fractures of bodies with notches and scotches. J. Mach. Manuf. Reliab. 37, 469–475 (2008). https://doi.org/10.3103/S1052618808050105
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618808050105