Abstract
A procedure of optimization of the initial contour and normal correction coefficient of bevel gears with circular teeth is proposed. This procedure permits a substantial increase in the geometrical factors of the gear and the load capacity of bevel gears with circular teeth. An algorithm of realizing the optimized initial contour by standard tool heads is suggested.
Similar content being viewed by others
References
Vulgakov, E.B. and Vasina, L.M., Evol’ventnye zubchatye peredachi v obobshchayushchikh parametrakh (Involute Gears in Generalized Parameters), Moscow: Mashinostroenie, 1978.
Spravochnik po geomentricheskomu raschetu evol’ventnukh zubchatukh i chervyachnykh peredach (Handbook of Geometrical Calculation of Involute and Worm Gears), Boltovskii, I.A., Ed., Moscow: Mashinostroenie, 1986.
Gavrilenko, V.A., Zubchatye peredachi v mashinostroenii (Gears in Machinery Manufacturing), Moscow: MASHGIZ, 1962.
Volkov, A.E., Lagutin, S.A., and Medvedev, V.I., Osobennosti primeneniya PK EKSPERT v proizvodstve konicheskikh zubchatykh peredach dlya tyazhelogo mashinostroeniya. Teoriya i praktika zubchatykh peredach (The Peculiarities of Software Package EXPERT Application in Gears Manufacturing for Heavy Engineering. Gear Theory and Practice), Izhevsk: IzhGTU, 2004.
Sheveleva, G.I., Volkov, A.E., and Medvedev, V.I., The Software Package for Preproduction of Spiral-Bevel Gears. Vestnik Mashinostroeniya, 2005, no. 9, pp. 6–14.
Verderevskii, V.A., Gleiberg, A.Z., and Nikitin, A.S., Truboprokatnye stany (The Tube Mills), Moscow: Metallurgiya, 1983.
Medvedev, V.I., Synthesis of Rolling Non-Orthogonal Bevel and Hypoidal Gears, Problemy Mashinostroeniya i Nadezhnosti Mashin, 1999, no. 5, pp. 3–12.
Volkov, A.E., Sposoby ustraneniya opasnosti podrezaniya krugovykh zub’ev konicheskikh koles. Prostranstvo zatseplenii (How to Remove the Dangerous of Interference in Bevel Gears. Gear Space), Izhevsk: IzhGTU, 2001.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.V. Akimov, 2008, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2008, No. 4, pp. 67–75.
About this article
Cite this article
Akimov, V.V. Initial contour optimization for bevel gears with circular teeth. J. Mach. Manuf. Reliab. 37, 371–378 (2008). https://doi.org/10.3103/S1052618808040092
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618808040092