Advertisement

Steel in Translation

, Volume 48, Issue 1, pp 34–38 | Cite as

Magnesia Sinter with Flux Based on Magnesium Silicate

  • E. V. Ovchinnikova
  • V. B. Gorbunov
  • A. N. Shapovalov
  • N. A. Maistrenko
  • I. S. Bersenev
Article
  • 7 Downloads

Abstract

The experimental production of sinter with the addition of a byproduct of magnesite production— serpentinite–magnesite—is considered. This additive improves the strength of the sinter produced. Recommendations are made regarding the best use of serpentinite–magnesite in the sintering shop at Ural Steel.

Keywords

sinter magnesia additives serpentinite sintering indices sinter strength dicalcium silicate 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Utkov, V.A., Vysokoosnovnoi aglomerat (Highly Basic Agglomerate), Moscow: Metallurgiya, 1977.Google Scholar
  2. 2.
    Shatsillo, V.V., Melamud, S.G., Lunegov, A.V., and Dudchuk, I.A., Use of the sideroplezites of the Bakal field in the modern agglomerated production, Nats. Metall., 2005, no. 5, pp. 74–79.Google Scholar
  3. 3.
    Yadav, U.S., Amerendra, R., Binod, D., and Santanu, G., Evolution of sinter quality at Tata Steel, Proc. 5th European Congr. on Coke and Ironmaking, Stockholm, 2005, no. 9 (2), pp. 11–15.Google Scholar
  4. 4.
    Ovchinnikova, E.V., Shapovalov, A.N., and Gorbunov, V.B., Specific behavior of MgO behavior during the sintering of agglomerates using the Bakal siderites, Chern. Metall., 2016, no. 11, pp. 30–33.Google Scholar
  5. 5.
    Ovchinnikova, E.V., Gorbunov, V.B., Shapovalov, A.N., et al., Comparison of behavior of manganese-containing materials from Southern Urals at the agglomeration temperatures, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2016, no. 11, pp. 814–820.CrossRefGoogle Scholar
  6. 6.
    Budnikov, P.P., Khimiya i tekhnologiya silikatov (Chemistry and Technology of Silicates), Kiev: Naukova Dumka, 1964.Google Scholar
  7. 7.
    Malysheva, T.Ya., Yusfin, Yu.S., Mansurova, N.R., Gibadulin, M.F., and Lekin, V.P., Mechanism of mineral formation and metallurgical properties of sinter of basicity 1.1–3.1 at OAO MMK, Steel Transl., 2007, vol. 37, no. 2, pp. 126–130.CrossRefGoogle Scholar
  8. 8.
    Yur’ev, B.P. and Kostousova, T.I., The properties of siderite ore and its annealing products during heat treatment, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1999, no. 3, pp. 17–23.Google Scholar
  9. 9.
    Bersenev, I.S., Maistrenko, N.A., Petryshev, A.Yu., and Chesnokov, Yu.A., Change of sintering parameters of iron agglomerate using dolomite at the Ural Steel Company, Chern. Metall., Byull. Nauchno-Tekh. Ekon. Inf., 2016, no. 3 (1395), pp. 52–57.Google Scholar
  10. 10.
    Anisimov, N.K., Naftal’, M.N., Maslov, E.V., et al., Modernization of production of Ural Steel Company as part of the development strategy of Metalloinvest Holding, Metallurg, 2016, no. 7, pp. 4–6.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • E. V. Ovchinnikova
    • 1
  • V. B. Gorbunov
    • 1
  • A. N. Shapovalov
    • 2
  • N. A. Maistrenko
    • 3
  • I. S. Bersenev
    • 4
  1. 1.Moscow Institute of Steel and AlloysMoscowRussia
  2. 2.Novotroitsk Branch, Moscow Institute of Steel and AlloysNovotroitskRussia
  3. 3.Ural SteelNovotroitskRussia
  4. 4.OOO NPVP TOREXYekaterinburgRussia

Personalised recommendations