Abstract
The paper is devoted to development of a portable vibrating unit and study of its applicability in generating seismic waves. The solution to developing a portable vibrating unit problem capable of generating a stable seismic signal in the target frequency range is very important. Existing solutions are cumbersome and cannot be widely applied in engineering seismic exploration. The paper describes in detail the design of the vibrator source, the stages of output laptop signals testing, the power amplifier, and haptic transducer control. Signals with different frequency sweeps were used during field acquisition. The recorded data were processed by multichannel analysis of surface waves. As a result of comparing the amplitude spectra and dispersion images of the surface wave, it was found that a hyperbolic (low-dwell) sweep signal generates a surface wave train in the entire frequency range (10–150 Hz), but does not produce high-frequency interference waves in cement concrete pavement as opposed to other sweep signals and sledgehammers. Based on the field data processing results, we reconstructed a one-dimensional shear-wave velocity model for soils and concluded on the success, practicability, and increased (compared to a sledgehammer) efficiency of using the developed vibrator source for acquisition and analysis of surface wave data for engineering seismology problems. The undoubted advantages of using a vibration source are controllability of the frequency content and its repeatability. The use of such vibroseis devices combined with stationary seismic recording systems is a promising direction for solving seismic monitoring problems.
REFERENCES
Castor, K., Bianchi, T., Winter, O., and Klein, T., Noise reduction in vibroseis source, SEG Technical Program Expanded Abstracts, 2014, pp. 16–20. https://doi.org/10.1190/segam2014-0520.1
Dean, T., Nguyen, H., Kepic, A., and Halliday, D., The construction of a simple portable electromagnetic vibrator from commercially available components, Geophys. Prospecting, 2019, vol. 67, no. 6, pp. 1686–1697. https://doi.org/10.1111/1365-2478.12645
Dergach, P.A., Tubanov, T.A., Yushin, V.I., and Duchkov, A.A., Features of software implementation of low-frequency deconvolution algorithms, Seism. Instrum., 2019, vol. 55, no. 3, pp. 345–352. https://doi.org/10.3103/S0747923919030046
Dou, S., Lindsey, N., Wagner, A.M., Daley, T.M., Freifeld, B., Robertson, M., Peterson, J., Ulrich, C., Martin, E.R., and Ajo-Franklin, J.B., Distributed acoustic sensing for seismic monitoring of the near surface: a traffic-noise interferometry case study, Sci. Rep., 2017, vol. 7, p. 11620. https://doi.org/10.1038/s41598-017-11986-4
Kaida, Y., High-resolution shallow subsurface mapping using a portable seismic vibrator, SEG Technical Program Expanded Abstracts, 1997, pp. 796–799. https://doi.org/10.1190/1.1886131
Kattsov, V.M. and Porfir’ev, B.N., Climatic changes in the Arctic: Consequences for the environment and economics, Arktika: Ekol. Ekon., 2012, no. 2, pp. 66–79.
Liew, M., Xiao, M., Liu, S., and Rudenko, D., In situ seismic investigations for evaluating geotechnical properties and liquefaction potential of fine coal tailings, J. Geotech. Geoenviron. Eng., 2020, vol. 146, no. 5, pp. 04020014. https://doi.org/10.1061/(asce)gt.1943-5606.0002228
Liu, H., Maghoul, P., and Shalaby, A., Seismic physics-based characterization of permafrost sites using surface waves, Cryosphere, 2022, vol. 16, no. 4, pp. 1157–1180. https://doi.org/10.5194/tc-16-1157-2022
Matsubara, Y., Kaida, Y., Osada, M., and Takahashi, T., High-resolution shallow seismic reflection profiling using portable vibrator, SEG Technical Program Expanded Abstracts, 1994, pp. 598–601. https://doi.org/10.1190/1.1932170
Nijhof, V., Portable high-frequency vibrator implemented in a compact PC-based seismic system, SEG Technical Program Expanded Abstracts, 1990, pp. 942–943. https://doi.org/10.1190/1.1890392
Park, C.B., Miller, R.D., and Xia, J., Multichannel analysis of surface waves, Geophysics, 1999, vol. 64, no. 3, pp. 800–808. https://doi.org/10.1190/1.1444590
Park, C.B., MASW horizontal resolution in 2D shear-velocity (V s) mapping, KGS Open-File Report, Lawrence: Kansas Geologic Survey, 2005.
Serdyukov, A.S., Yablokov, A.V., Duchkov, A.A., Azarov, A.A., and Baranov, V.D., Slant f-k transform of multichannel seismic surface wave data, Geophysics, 2019, vol. 84, no. 1, pp. A19–A24. https://doi.org/10.1190/geo2018-0430.1
Song, X., Tang, L., Zhao, S., Zhang, X., Li, L., Huang, J., and Cai, W., Grey wolf optimizer for parameter estimation in surface waves, Soil Dyn. Earthquake Eng., 2015, vol. 75, pp. 147–157. https://doi.org/10.1016/j.soildyn.2015.04.004
Funding
The study was carried out with the financial support of the Russian Science Foundation, (project no. 20-77-10023).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
About this article
Cite this article
Yablokov, A.V., Dergach, P.A., Serdyukov, A.S. et al. Development and Application of a Portable Vibroseis Source for Acquisition and Analysis of Seismic Surface Wave Data. Seism. Instr. 58 (Suppl 2), S195–S203 (2022). https://doi.org/10.3103/S074792392208014X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S074792392208014X