Abstract
A method of absolute calibration of electrodynamic seismic sensors by single-sensor displacement is theoretically justified. It is shown that the method can be implemented using simple mechanical devices and a recording system. The required mathematical processing of the step-test impact can also be carried out using only standard software on any modern PC. A practical implementation of the method is shown by the example of calibration of a 10 Hz geophone. Features of the test technology and the mathematical processing of the obtained record are presented. The method is recommended for the calibration of sensors (velocimeters) with natural frequencies from 0.5 to 30 Hz.
Similar content being viewed by others
References
Aranovich, Z.I., Melamud, A.Ya., Gomzyakova, E.S., Trapeznikov, N.L., and Shilova, N.E., Pulse-based calibration of complex seismometric channels, Seism. Prib., 1979, no. 12, pp. 118–129.
Arkhangel’skii, V.T. and Shvartsburg, Ya.A., On a method for calibration of seismographs, Seism. Prib., 1977, no. 10, pp. 170–174.
Besekerskii, V.A. and Popov, E.P., Teoriya sistem avtomaticheskogo regulirovaniya (Theory of Automatic Regulation Systems), Moscow: Nauka, 1972.
Daragan, S.K. and Osadchii, A.P., Impul’snaya kalibrovka i kontrol’ seismicheskogo kanala, Vychisl. Seismol., 1967, vol. 3, pp. 245–253.
Gamburtsev, G.A., Osnovy seismorazvedki (Fundamentals of Seismic Survey), Moscow: Gostoptekhizdat, 1959.
Gik, L.D., Izmerenie vibratsii (Measurements of Vibrations), Novosibirsk: Nauka, 1972.
Shvartsburg, Ya.A., Pulse-based calibration of long-period seismographs, Seism. Prib., 1976, no. 9, pp. 87–90.
Yushin, V.I., On the transfer function and phase characteristics of seismic receiver, Geofizika, 2000, no. 5, pp. 13–15.
Yushin, V.I., Theory and digital model of a seismic receiver from the geophysical engineering and programming viewpoints, Prib. Sist. Razved. Geofiz., 2002, no. 2, pp. 5–10.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © P.A. Dergach, V.I. Yushin, 2014, published in Seismicheskie Pribory, 2014, Vol. 50, No. 2, pp. 51–65.
About this article
Cite this article
Dergach, P.A., Yushin, V.I. Absolute calibration of seismic sensors using a displacement jump: Theory and practice. Seism. Instr. 51, 85–93 (2015). https://doi.org/10.3103/S0747923915010053
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0747923915010053