Abstract—
The article presents the experimental results of the measurement of strains with fiber-optic strain sensors based on Bragg gratings embedded into the material. he following experiments were conducted: measurement of strains in a sample made of a polymer composite material with a stress concentrator, measurement of process-induced strains during the formation of a polymer composite material, measurement of process-induced strains during the curing of a cement mixture in the manufacture of concrete, and measurement of creep strain in a polymer material. In addition to the experiments demonstrating the possibility of measuring strains with fiber-optic strain sensors based on Bragg gratings embedded into the material, the results of a numerical analysis of the problems arising from the use of these sensors are presented. The analysis of the redistribution of the stress-strain state resulting from the embedding of an optical fiber into the material and the reliability of the strain values calculated on the basis of physical quantities obtained using sensors are among these problems.
Similar content being viewed by others
REFERENCES
K. O. Hill, Y. Fujii, D. C. Johnson, and B. S. Kawasaki, “Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication,” Appl. Phys. Lett. 32 (10), 647–649 (1978). https://doi.org/10.1063/1.89881
A. Dasgupta, Y. Wan, and J. S. Sirkis, “Prediction of resin pocket geometry for stress analysis of optical fibers embedded in laminated composites,” Smart Mater. Struct. 1 (2), 101–107 (1992). https://doi.org/10.1088/0964-1726/1/2/001
N. Lammens, G. Luyckx, E. Voet, et al., “Finite element prediction of resin pocket geometry around embedded optical fiber sensors in prepreg composites,” Compos. Struct. 132, 825–832 (2015). https://doi.org/10.1016/j.compstruct.2015.07.003
K. Shivakumar and A. Bhargava, “Failure mechanics of a composite laminate embedded with a fiber optic sensor,” J. Compos. Mater. 39 (9), 777–798 (2005). https://doi.org/10.1177/0021998305048156
K. Shivakumar and L. Emmanwori, “Mechanics of failure of composite laminates with an embedded fiber optic sensor,” J. Compos. Mater. 38 (8), 669–680 (2004). https://doi.org/10.1177/0021998304042393
J. M. A Silva, T. C. Devezas, A. P. Silva, and J. A. M. Ferreira, “Mechanical characterization of composites with embedded optical fibers,” J. Compos. Mater. 39 (14), 1261–1281 (2005). https://doi.org/10.1177/0021998305050423
G. Zhou and L.M. Sim, “Damage detection and assessment in fibre-reinforced composite structures with embedded fibre optic sensors-review,” Smart Mater. Struct. 11 (6), 925–939 (2002). https://doi.org/10.1088/0964-1726/11/6/314
A. Al-Shawk, H. Tanabi, and B. Sabuncuoglu, “Investigation of stress distributions in the resin rich region and failure behavior in glass fiber composites with microvascular channels under tensile loading,” Compos. Struct. 192, 101-114 (2018). https://doi.org/10.1016/j.compstruct.2018.02.061
G. Luyckx, E. Voet, N. Lammens, and J. Degrieck, “Strain measurements of composite laminates with embedded fibre bragg gratings: criticism and opportunities for research,” Sensors. 11 (1), 384–408 (2011).
R. Hadzic, S. John, and I. Herszberg, “Structural integrity analysis of embedded optical fibres in composite structures,” Compos. Struct. 47 (1–4), 759–765 (1999).
V. V. Makhsidov, M. Yu. Fedotov, A. M. Shiyonok, and M. A. Zuev, “For an issue of embedded optical fibre in cfrp and strain measurement with fibre bragg gratings sensors,” Mekh. Kompoz. Mat. Konstr. 20 (4), 568–574 (2014).
A. V. Ilichev, V. V. Makhsidov, A. M. Shiyonok, and N. O. Yakovlev, “Strain measurement of carbon fibre reinforced plastic with embedded fibre bragg grating,” Mekh. Kompoz. Mat. Konstr. 21 (3), 360-369 (2015).
V. P. Matveenko, I. N. Shardakov, A. A. Voronkov, et al., “Measurement of strains by optical fiber Bragg grating sensors embedded into polymer composite material,” Struct. Control Heal. Monit. 25 (3), e2118 (2018). https://doi.org/10.1002/stc.2118
A. N. Anoshkin, A. A. Voronkov, N. A. Kosheleva, et al., “Measurement of inhomogeneous strain fields by fiber optic sensors embedded in a polymer composite material,” Mech. Solids 51 (5), 542–549 (2016). https://doi.org/10.3103/S0025654416050058
T. V. Tretyakova, A.N. Dushko, E. M. Strungar, et al., “Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests,” Vestn. PNIPU Mekh., No. 1, 175–185 (2019). https://doi.org/10.15593/perm.mech/2019.1.15
V. P. Matveenko, N. A. Kosheleva, I. N. Shardakov, and A. A. Voronkov, “Temperature and strain registration by fibre-optic strain sensor in the polymer composite materials manufacturing,” Int. J. Smart Nano Mater. 9 (2), 99–110 (2018). https://doi.org/10.1080/19475411.2018.1450791
N. Kosheleva and G. Serovaev, “Registration of the creep behavior by embedded and surface mounted FOSS,” IOP Conf. Ser. Mater. Sci. Eng. 581, 012043 (2019). https://doi.org/10.1088/1757-899X/581/1/012043
R. Czarnek, Y. F. Guo, K. D. Bennett, and R. O. Claus, “Interferometric measurements of strain concentrations induced by an optical fiber embedded in a fiber reinforced composite,” Fiber Optic Smart Struct. Skins 968, 43–54 (1989). https://doi.org/10.1117/12.948886
Funding
This study was supported by the Russian Science Foundation (project no. 19-77-30008).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by A.A. Borimova
About this article
Cite this article
Matveenko, V., Kosheleva, N. & Serovaev, G. EXPERIMENTAL AND THEORETICAL RESULTS FOR STRAIN MEASUREMENT USING FIBER BRAGG GRATING SENSORS EMBEDDED INTO THE MATERIAL. Mech. Solids 56, 885–894 (2021). https://doi.org/10.3103/S0025654421060121
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0025654421060121