Advertisement

Russian Engineering Research

, Volume 39, Issue 11, pp 970–972 | Cite as

Production of Cylindrical Gears by Means of Cutting Heads

  • V. D. ArtamonovEmail author
Article
  • 1 Downloads

Abstract

The potential of cutting heads of various types in cutting cylindrical gears is analyzed. On that basis, the following gear-cutting systems are proposed: a progressive high-speed system; a compact low-waste system; and a system with matched cutting of gears in transmissions.

Keywords:

cylindrical gears gear-cutting systems gear-cutting methods cutting head 

Notes

CONFLICT OF INTEREST

The authors declare that they have no conflicts of interest.

REFERENCES

  1. 1.
    Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Machining cylindrical gears by means of cutting heads, Russ. Eng. Res., 2007, vol. 27, no. 11, pp. 810–811.CrossRefGoogle Scholar
  2. 2.
    Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Tooth rolling of cylindrical gears, Stanki Instrum., 2005, no. 5, pp. 24–26.Google Scholar
  3. 3.
    Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Paired tooth cutting of cylindrical gears, Russ. Eng. Res., 2009, vol. 29, no. 3, pp. 319–321.CrossRefGoogle Scholar
  4. 4.
    Gryazev, M.V., Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Manufacture of cylindrical gears from progressive blanks with a stamped tooth crown, Russ. Eng. Res., 2010, vol. 30, no. 7, pp. 749–750.CrossRefGoogle Scholar
  5. 5.
    Gryazev, M.V., Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Optimal machining of teeth in stamped tooth crowns by cutter heads, Russ. Eng. Res., 2010, vol. 30, no. 8, pp. 827–829.CrossRefGoogle Scholar
  6. 6.
    Malikov, A.A., Sidorkin, A.V., and Yamnikov, A.S., Cutting and plastic deformation in the shaving and rolling of cylindrical gears with round teeth, Russ. Eng. Res., 2013, vol. 33, no. 6, pp. 363–366.CrossRefGoogle Scholar
  7. 7.
    Malikov, A.A. and Sidorkin, A.V., Heat liberation in the shaving of cylindrical gears, Russ. Eng. Res., 2015, vol. 35, no. 8, pp. 631–634.CrossRefGoogle Scholar
  8. 8.
    Malikov, A.A., Yamnikov, A.S., Fedorov, Yu.N., and Zolotukhina, O.L., Simplified calculation of the initial rack profile in tooth-shaping mills, Russ. Eng. Res., 2008, vol. 28, no. 10, pp. 1015–1017.CrossRefGoogle Scholar
  9. 9.
    Malikov, A.A., Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., RF Patent 2502585, Byull. Izobret., 2013, no. 36.Google Scholar
  10. 10.
    Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., RF Patent 2347650, Byull. Izobret., 2009, no. 6.Google Scholar
  11. 11.
    Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Paired cutting of cylindrical gears with longitudinally modified teeth, Russ. Eng. Res., 2009, vol. 29, no. 6, pp. 625–627.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Tula State UniversityTulaRussia

Personalised recommendations